Autosport Labs

Hi Brent,

Thanks for the info. I will put the Autosport Labs USB/9pin connector on my wish list for Christmas.
The version 3 system on my 1952 Willys Jeep is still functioning very well - without a hitch during the last 8 years or so since I installed it.

Best regards, Robert

Hi, am writing a contribution in the Dutch magazine "Klassiek & Techniek" about my Willys Jeep and the installation of a Megajolt system. May I include below picture in the article? Of course I will mention the source. Robert Verhey https://wiki.autosportlabs.com/images/thumb/7/79/Mjlj...

My Megajolt Lite Jr has a 9 pin outlet for connection to the computer. What to do now that my new computer has no 9 pin connection anymore? Only 15 pin, USB and other "flat connectors". Are there adaption cables, or?
Otherwise 0 problems with my 8 year old Megajolt!
Robert Verhey

Hi, I have installed the Megajolt on my Willys Jeep M38A1, and has been functioning very well, untill recently. I can't get it started. The last time it ran, it ran on 2 cylinders, before that pretty smoothly on three, and during summer an all four w/o a problem. Now it refuses to start at all. I ha...

Hi All, The breadbord installation works now, supposedly also when the Megajolt Lite ECU is connected. Time to go to the next phase: Configuring the software in the Megajolt Lite. I don't have a laptop computer. Therefore I like to take the Megajolt Lite unit to my study. Is it sufficient to connect...

Brent,

I haven't come so far yet. But your link "this pinout" gave me the information I was after.

Thanks,

robert verhey
Finspång, sweden

Hi There, I have now all the parts in house, and thinking about how to connect everything. I think I have the "Ford part" under control. What I'am missing is a schematic how to connect the Megajolt box via the square connector? There are about 20 outlets there, but where to connect 12 V, g...

Are there any specific limitations to the size and the shape of the 36 - 1 toothed wheel? The standard toothed ring has main dimensions OD 144 mm ( 5.7 inch ) ID 128 mm ( 5 inch ) For various reasons i like to install a toothed ring with the following dimensions: OD 100 mm ( 3.9 inch ) ID 91 mm ( 3....

robert verhey
Finspång, sweden

Starting with a first MAP based on stock curve (RPM) won't be a problem. But how does one go about the tuning? How does one judge whether one setting is better than the other one? Which rules do apply?