Search found 11 matches

by richardk
Sun Jan 11, 2009 11:27 am
Forum: Q&A
Topic: Revs now reading very low
Replies: 5
Views: 2602

OK, I've stripped back the diode circuit in my loom and the zener was shot,replaced it and I'm now a happy bunny again. Just need to fix the Jaw :( Unfortuanatly the creator of Jaw isn't as quick as yourself in replying to requests for help. Thanks again Brent for creating such a superb bit of kit o...
by richardk
Sun Jan 11, 2009 9:09 am
Forum: Q&A
Topic: Revs now reading very low
Replies: 5
Views: 2602

Thanks for that Brent, yes I'm using the classic diode circuit right off the coil pack, now I've had time to sleep on it, realised that having 15v now on that tach output isn't quite right, this is sort of confirmed when I switch on my lights the rev display on the tachometer raise quite alot, still...
by richardk
Sat Jan 10, 2009 11:52 pm
Forum: Q&A
Topic: Revs now reading very low
Replies: 5
Views: 2602

Revs now reading very low

Just to give you a bit of background, my megajolt has been perfect for about a year, and I recently got a Jaw kit to monitor fueling, anyway I have managed to break my jaw doing what a few people have done http://14point7.com/forum/index.php?topic=79.0 but ever since blowing the atmega8 micro on my ...
by richardk
Sun Oct 14, 2007 9:03 pm
Forum: Operation
Topic: Timing marks don't align with a strobe light
Replies: 5
Views: 5454

Having moved my toothed wheel round as per the suggstions from Richard (rbalmford )and as the engine did run before making this change does this mean I now should have to change round the wires to the coil pack? I have just checked the wires on the coil pack connector and have found that they are th...
by richardk
Sun Oct 14, 2007 4:19 pm
Forum: Operation
Topic: Timing marks don't align with a strobe light
Replies: 5
Views: 5454

The lead thing was purely an accident by me connecting the 1 & 2 hv leads the wrong way round at the coil pack. My engine is a pinto and does turn clockwise so have I put the gap on toothed wheel 9 teeth to the wrong side? I have now turned my toothed wheel around so will see how that goes. The toot...
by richardk
Sun Oct 14, 2007 10:38 am
Forum: Operation
Topic: Timing marks don't align with a strobe light
Replies: 5
Views: 5454

The stobe markings are about an 1 inch to the left of the timing marks. Hope that makes sense :D As it seems to be running, I think the best thing would be to wait until I have some coolent in then I can play with the toothed wheel position. Thinking about it, each notch in the wheel equates to 10 d...
by richardk
Sat Oct 13, 2007 9:11 pm
Forum: Operation
Topic: Timing marks don't align with a strobe light
Replies: 5
Views: 5454

Timing marks don't align with a strobe light

I've got a pinto and megajolt which although haven't had running for long as I haven't got to the point of doing the cooling system yet. After install started nearly first time, and that was only because I had a numpty moment and connected the ht lead wrong on the coil pack! Anyway I immediatly chec...
by richardk
Mon Oct 08, 2007 12:53 pm
Forum: Installation
Topic: Small 12v bulb for Shift Light
Replies: 3
Views: 2820

Thanks gentlemen. Will put it on and see how bright it is then.

Best wishes

Rich
by richardk
Sun Oct 07, 2007 8:54 pm
Forum: Installation
Topic: Small 12v bulb for Shift Light
Replies: 3
Views: 2820

Small 12v bulb for Shift Light

Hi all Is it possible to use a small bulb like this one http://cgi.ebay.co.uk/DURITE-DASH-BOARD-WARNING-LAMP-GREEN0-609-24-OR-0-60974_W0QQitemZ120047640463QQihZ002QQcategoryZ9886QQtcZphotoQQcmdZViewItem instead of a led, I already have a spare one so wouldn't have to buy an led version but just dont...
by richardk
Sun Jan 28, 2007 9:46 am
Forum: Operation
Topic: TPS seems wrong way round
Replies: 2
Views: 2585

TPS seems wrong way round

When I start up the configuration software, my tps reading is high about 200, then if I turn the tps is goes low to about 45, I have 3 wires coming out of the tps 2 black and a brown, any ideas on what I have done wrong. didn't want to go swapping wires round incase I damage my controller. Any ideas...
by richardk
Fri Jan 05, 2007 8:18 pm
Forum: Assembly
Topic: UK parts source
Replies: 31
Views: 36603

Updated Farnell List

This is for the TPS version.

<a href="http://www.kilmartin.it/uploads/megajol ... s">Updated Farnells Component List </a>