Autosport Labs

T3tone wrote:just spotted a post which includes all voltage readings of a working set up

I can't see the wood for the trees can anyone spot this post with all the readings? thanks

and as much of the wire harness as you can manage. indeed. Especially the shielded wire. I didn't bother getting it,because maplin sell similar. But I find it isn't quite it from appearance,I haven't got mine fired up yet,so I can't comment on it's performance. The VR shielded wire has just the two...

Just a bit baffled on the pip&saw shielded wire running from the Edis. Apart from the blue/yellow and blue/red wire,there's also a brown wire all shielded in the PVC insulator,how is this dealt with? Because I've got the shielded wire for the VR sensor which only requires 2 wires.

sorted fellas,well almost http://i292.photobucket.com/albums/mm14/megajolt/triggerVr.jpg http://i292.photobucket.com/albums/mm14/megajolt/TrigWheelVr1.jpg not quite sitting at the correct angle. And here is the EDIS-4 and coilpack http://i292.photobucket.com/albums/mm14/megajolt/Edis4Coilpack.jpg

Hi gang, I managed to get the crank pulley off with a battle,using a 2 legged puller,I think I'll buy a 3 legged one for next time. Anyway,as I have done a PAS conversion on mine,I have a twin groove on the pulley,so it is different to what you may have seen. I just want to clarify,via the following...

You are correct Martin,thanks m8! e) don't bother - accept that you PGM2 wire is brown and your TACH OUT wire is red. If I couldn't do a) to c), I'd do e) :D had a fiddle with the pins,and tugged at the wires,sod it I thought :) I'll just have to solder green wire onto brown,and whatever colour PGM3...

MartinM wrote:Do I win the prize?

Your +V and ground wires into the Molex are at the wrong end of the plug....

they are?
I was going off Brents diagram

next to PGM4 there is that notch,which I suspect is the clip. Ok,will try other end

Thanks for your reply Danny Post a picture of how the components are installed. I don't know if you can see the picture clearly,my mobile camera isn't great http://i292.photobucket.com/albums/mm14/megajolt/MBview.jpg Possibly a reversed diode? doesn't seem so,but I am comparing my build against Bren...

Ok,just been assembling the MB,and have tested the C7 and C5. Here are pictures how I am doing it. I'm sure someone will spot my error. http://i292.photobucket.com/albums/mm14/megajolt/Testing1.jpg I am using a 9volt battery http://i292.photobucket.com/albums/mm14/megajolt/9vbat.jpg and I have conne...

The wires on the EDIS unit that I have,for PIP and SAW,are already shielded,do the PIP and SAW wires leading from the molex on the MJLJ need to be shielded aswell?

It's arrived! Thanks ever so much Brent.
I'm impressed on the technology.
Is there any historical information on the website about yourself and the invention of Megajolt?

brentp wrote:My pleasure! Share your installation experience, good and bad, and of course photos with us when you can!

What?! Do you want me to embarrass myself? Of course I will Brent,my soldering isn't the best

@Brent just missed your post by a minute

26 Mar 2008 07:29

26 Mar 2008 07:30

Thanks Brent

Just been on the UPS site

Your item cleared customs in GREAT BRITAIN at 3:21 PM on March 25, 2008. Information, if available, is updated every evening. Please check again later

aha...I've just seen this

United States Postal Service (1 x 0.92lbs) (Priority Mail International (6 - 10 Days))