Autosport Labs

Could you tell me which are the correct schottky diode to use, i have a choice of three:-
N91CA-3AMP
N13CC-15AMP
JA46-1AMP

Cheers lee

I use a LM1 and wideband sensor
http://www.innovatemotorsports.com/products/lm1.php

I have a device that tells u exactly what the mixture is at whatever load and revs your doing on the open road and you can ajust the map to suit. car runs really really well although i need to build the aux input ,for cold starts this adds 3deg to the first three bins untill up to a presett temp.

I am using .45 idle jets 140mains and 200 air correcters with 32 mm chokes

hope this helps

I was out driving the other day and the car was running great! untill i heard lots of misfires and the engine would not run. some pulleys on cars have like a rubber centre,kind of a shock absorbing material,this failed and and all timing was lost.just wanted to share this info.luckally no other dama...

when i did my own boxer, I got cylinder 1 to tdc, undo the spark plug and check it.then fit the wheel as described and it should be at 10deg edis only you really need a modern timing light for wasted spark system. is your triger wheel running true?

I intend to hopefully have my map finalised next week i am runing tps at the end of the throttle shaft.are you using tps? i will post a screen shot of the map when finished.

capri_turbo
Good job with the aux input. could you make me a list of all the parts required so that i can try and attempt to copy your instalation.did you get the bits and bobs from maplins?cheers lee

Hi, could somebody help :roll: . Iwould like to add the aux input for cold starts of the engine by advancing the timing untill a certain temp, i believe this can be done. The only problem is when it comes to electrical instalations i am hopeless! could you please post a list of parts i require, boar...

Hi, my engine is in pieces at the moment and the heads are away for a valve job and a clean up skim. so i should hopefully have it all back together by mid febuary. it would be great to have a step by step manual for setting up the aux input for the afr and data logging features. Im sure this would ...

Hi Brent, I was just wondering how it was going, with the various v3 updates?

Hi Brent, I am just curious about what new features will be included on the v3 board, i know that the aux input will be really usefull afr/temp/etc. Will the repetitive spark up to 2000rpm be included ? should be good for the emitions test. Thanks Lee

brent,

Any news when aux input will be ready for the v3? I am stugling on afr and jetting and this would be great to have right now, with it been summer and all in england we only get three weeks of hot dry weather if were lucky

Can you post the details of your ignition curve that you were given with the engine.that would help, are you going for map or tps?