Autosport Labs

make and model is stated above and i will try in on my old xp based machine and see if the driver makes any difference, belkin does only suggest that it is a pda adaptor but it seems to work fine with other serial based devices like my leonardo LPG computer. http://www.belkin.com/support/product/?li...

yeah seems to be no change will spearatically get readings but not constant so id suggest its a conflict with the driver maybe
any ideas aside from gettin a new usb to serial?

i have not but im not sure if i will need to update my firmware will give it a go tonight and let you know the results

i have a similar problem, program will load and periodically get updates. have the same adaptor and running vista, will work with other software, (aeb gas computer running serial) i have attached the driver i was using, and was using 3.2.0 config software
Cheers
Ben

Just like to share the experience of my mjlj, found that it didnt take long to setup, all i did was take my time to splice the loom into my original although i did sorta cheat by using a motor that originally had an edis based setup (explorer sohc v6). its simple to program(although the default map ...

mate the way i did it is to start the curve at 10 and end at 36 not using load to alter and then im goin to get it on a dyno to set the map properly

i think that my major problem was that i was running it all of the original coil power wire. this wire i have been told by my father that is a mechanic is a resistor wire or has a resistor in it somewhere. so all i did was put the wire that used to go to the coil to a relay and then ran the power wi...

got it working changed a few things, put better power to the ignition and started using 3.0 rather than 3.2 config, will try it with the 3.2 later
cheers

hi all
anyone done a capri v6 map??
cheers

using a laptop with just the battery runnin??

g'day mate,
nice install
where did u get the wheel from?
cheers
Ben

i have an issue, when i run my engine my computer doesnt talk to my mj??
not using a serial to usb adaptor, and talks happily with the ignition on and not running??
any ideas??
thanks
Ben Ellis

are the user outputs a positive feed or neg?? or can they be changed?
ordered one anyway even if i dont use it

Hey guys,
im sure this has been asked before, but there is a wire from the coil(unsure of polarity), that plugs through the tacho wondering how it would work with the megajolt??
any help would be good.