Search found 33 matches

by -Ad-
Sat Jan 19, 2008 12:40 pm
Forum: Operation
Topic: MAP sensor advance issues
Replies: 15
Views: 13977

That trigger wheel is seriously TINY :shock:
I would doubt you will get a good enough signal wave from that at all.
________
How to roll blunts
by -Ad-
Fri Jan 18, 2008 7:11 pm
Forum: General Discussion
Topic: not mjjl Q, but on carbs?
Replies: 1
Views: 3664

Thats just for balancing the carbs to make sure they are allowing the same amount of air at idle.
That doesn't change the air/fuel mix which involves experimenting with different sized jets/needle positions.
And on a rolling road is the best place to do it.
________
Honda SL90 history
by -Ad-
Fri Jan 18, 2008 4:15 pm
Forum: Installation
Topic: Non Ford VR/Crank sensors
Replies: 2
Views: 2868

So it might work, but it might not.
Thats put my mind at rest :lol:
________
Honda Super Cub history
by -Ad-
Fri Jan 18, 2008 3:24 pm
Forum: Installation
Topic: Non Ford VR/Crank sensors
Replies: 2
Views: 2868

Non Ford VR/Crank sensors

Do they work with EDIS?

Seeing as my engine already has a crank sensor and proper bracket already fitted originally, if i can use that i will.
Its a Gm/Opel sensor.

I assume they would work with the 36-1 wheel/edis?
________
Luc donckerwolke
by -Ad-
Wed Jan 16, 2008 7:52 pm
Forum: Installation
Topic: Pic request-Show me your crank trigger wheel/vr sensor
Replies: 9
Views: 8387

Cheers for the pics.
Martin-That looks a very pro install. Dry sump eh, guess thats revving quite highly then?

Think the best way for me to do it will be like above, get both lathed so they are a tight fit, and then use a few bolts to hold it secure.
________
LAMBORGHINI LM004 SPECIFICATIONS
by -Ad-
Mon Jan 14, 2008 7:40 pm
Forum: Installation
Topic: Pic request-Show me your crank trigger wheel/vr sensor
Replies: 9
Views: 8387

Cheers.
Ideally i need pics of someone thats mounted one to a vauxhall pully.
________
Suzuki Gsx-R1100 Specifications
by -Ad-
Mon Jan 14, 2008 7:39 pm
Forum: Installation
Topic: Vauxhall XE Trigger Wheel fitment questions
Replies: 8
Views: 6701

Knowing a c20xe bottom pully, it looks easy to bolt it on in my opinion.
Just use the small 6 bolts that hold the pully to the main crank pully/sprocket.
________
Michigan medical marijuana dispensaries
by -Ad-
Sun Jan 13, 2008 10:26 pm
Forum: Installation
Topic: Pic request-Show me your crank trigger wheel/vr sensor
Replies: 9
Views: 8387

Yeah i have, theres not many detailed pics tho.
And none are vauxhall/opel, which is what my engine is :)
Was hoping id find someone with a similar crank pully to mine.
________
BUY ROOR BONGS
by -Ad-
Sun Jan 13, 2008 10:05 pm
Forum: Installation
Topic: Pic request-Show me your crank trigger wheel/vr sensor
Replies: 9
Views: 8387

Pic request-Show me your crank trigger wheel/vr sensor

As above.
I need to find the best way to mount my 36-1 wheel and vr sensor, so want to see how other people have done it :)
________
Vapir one vaporizer
by -Ad-
Sat Jan 12, 2008 7:20 pm
Forum: Operation
Topic: Soft rev limiter question
Replies: 5
Views: 4028

It should do the job for me then.
Just to stop it over revving.

Obviously dropping it into 2nd gear instead of 4th at 90mph, the limiter wont have any effect. lol
________
WEED VAPORIZER
by -Ad-
Fri Jan 11, 2008 7:45 pm
Forum: Operation
Topic: TPS calibration question
Replies: 4
Views: 3825

Ah right, ok mate. I get you.
So it'll just run the advance entered in bin Load 10.

Sorted then.

Cheers again.
________
TOYOTA TERCEL SPECIFICATIONS
by -Ad-
Fri Jan 11, 2008 7:30 pm
Forum: Operation
Topic: TPS calibration question
Replies: 4
Views: 3825

Ok thaks Brent.
So when the engines idling, the tps load will be 0, which there isn't a load bin for on the map?
________
Buy bubblers
by -Ad-
Fri Jan 11, 2008 7:10 pm
Forum: Operation
Topic: TPS calibration question
Replies: 4
Views: 3825

TPS calibration question

Just calibrated the tps scale, and it works fine. 0 with no throttle, 100 with full throttle. BUT a quick thought, with no throttle, the idle stop still holds the throttle slightly open. So should that be "within" the tps range? If you get me. I.e. Its now calibrated as closed throttle is when its i...
by -Ad-
Fri Jan 11, 2008 3:59 pm
Forum: Q&A
Topic: MegaJolt and boost
Replies: 6
Views: 5502

What willl you be using to control the fuel side of things?
Pressuirised carb(s)?
________
Honda Nh Series Specifications
by -Ad-
Fri Jan 11, 2008 3:58 pm
Forum: Operation
Topic: Using Pro Output to switch a fuel pump relay-Useful for safe
Replies: 9
Views: 5082

Sorted it now, im wiring the pump up to an inertia switch.
To trip off if the cars ever involved in a crash.
________
How To Boil