Autosport Labs

Hi Brent, thank you for the information it gives me the cheer to go ahead and get it done. I will certainly get back to you and let you all know how I got on. I think this will be a few months as things move slow here and I have to get the trigger wheel mounting worked out as the crank pulley has a ...

Hi all, can anyone tell me if the Megajolt is suitable for a Positive Earth vehicle ? I currently have it fitted to a negative earth vehicle which I am selling and wish to swap it over onto a positive earth vehicle. This new vehicle will have a dynamo, I'm not sure the voltage control will be as clo...

For your information starter motor ring gears on the flywheel are shrink fitted and these carry very large loadings. I would suggest that the trigger wheel would be fine done this way.

Interesting posting, having a good play with this. Thanks for taking the time to create this .

..... I run a Land Rover, 1958 converted to run on LPG. Hence " Gassed'58 " Both it and I are delighted with the Megajolt .......

Glad to hear you have it sorted. The good thing about your posting is it will help someone else with the same problem.

When I was trying to get the best sized vacuum reservoir for my set up I used a large plastic syringe . I plumbed it into the vac line with a " T " piece and by pushing or pulling the plunger in or out I was able to adjust the volume of the reservoir in a matter of seconds. This means that...

Glad to hear you have some success with this. Here is a link to the one I use, works perfectly for my Acer laptop running XP http://www.amazon.co.uk/USB-RS232-Converter-Cable/dp/B00077DJIQ Slightly more expensive than yours but handy for people to know what else works as so many seem to have problem...

Autosparks are well known in the classic car world and supply sundries too, try this link ( hope it works otherwise search " tape " )

http://www.autosparks.co.uk/advanced_se ... pe&x=9&y=8

.............................All cool here, well done all concerned...................

...................... SPAM .........

For an interactive pictorial representation of what happens to ignition timing you may want to have a look at the link below, click on the graph to make it work, also a link at bottom of page to represent speed mapping. http://www.gill.co.uk/products/digital_ignition/Introduction/10_load_map.asp Hop...

A scrapyard that you can go into and take off yourself is the best option ( older and smaller yards ). I had all the parts for £20 complete with all the wiring. I took my time to take it out and stripped back the wiring as far as I could just in case. This turned out to be of great benefit as the ba...

Ok, I got it all sorted in the end, a trip to the scrapyard and one replacement Edis unit for £10 and the job was a good one....It runs on Edis alone !!!!! :mrgreen: :mrgreen: :mrgreen: Most impressed already, started up on LPG much smoother than usual, settled down better and the timing marks are r...

Hi Spockie Tech, thanks for the input. First time try out of the Edis on the vehicle, I wanted to prove it out prior to introducing the Megajolt into the equation. Polarity should be correct as the wiring was removed from the donor vehicle in one complete lump and not altered here. Sensor distance i...