Autosport Labs

i think ive solved it! if i set the advance on the strobe to zero so it flashes on the spark (instead of using the buttons to make it flash at TDC) and then read off the value from the guage on the timing chain cover on the car, it seems to be working fine, all the values match. it now reads 5 where...

yes it is a snap on one. i dont understand why it only doubles the extra advance added by mjlj. it works fine for the standard 10 degrees. anything above 10 though and it gets doubled

hello, i have a strange problem. with my megajolt version 4 if i run my engine (a-series) with edis only, it will run on 10 degrees of advance as checked with a strobe light, no problems. if i run a map on megajolt (version 4; MAP version) with a set 10 degrees advance throughout it will also be exa...

im in the process of wiring the rev limiter internally but im a bit confused with the installation guide. i dont get these steps.. - Cut the REV_LIMIT trace on the MJLJ board running from the ULN2003 to the REV_LIMIT connector pin. The REV_LIMIT pin will now be the new COIL power supply.. - Connect ...