Autosport Labs

I have a MJLT for TPS. Can I change this to a MAP sensor? Or in other words, is the board equal for TPS and MAP and is it just the sensorpart that has to be changed? And if so, are these parts separately available?

kind regards
Wim Janssen

Hi Brent, I don't think I understand completely. I have the following 3 ranges. /ADC value /Voltage /Scaled value /0------------/0V-------/100(corresponding to 10:1 AFR) /.-------------/.---------/. /.-------------/.---------/. /.-------------/.---------/. /255---------/5V-------/200(corresponding t...

I have some problems with my Auxiliary Input Channel Configuration. I put a AFR signal on the Auxiliary Input and tried to visualize it on a runtime gauge. There are 255 values which correspond to the 0-5V. I made up an calibration range for AFR from 100 to 200 (255 units) which corresponds with 0-5...

Hi there, Can anyone explain to me how i should place the zenerdiode? In the MJLJ V4 kit assembly guide it is explained as "The silk-screened stripe on the PC board matches the diode's stripe". But what side is the silk screened stripe? Is it towards the outside of the board or towards the...

If I make my own triggerwheel, is the diameter important?

regards
Wim