Autosport Labs

I have turned down the harmonic dampner hub a little to smooth it. Laying out the holes will be easy, I guess the only real work will be the need for a really steady triangulated bracket as the sensor will be 5" away from the engine block instead of the pictured one which was right against it. ...

Greetings: New install, new sensor from a 1994 Ranger 4.0L V-6. wiring continuity is OK. sensor gap is .003". No signal when cranking engine from sensor. It is a 3.5" wheel diameter and the teeth have been flattened slightly. The sensor has a 1/4" diameter core, the wheel is 1/8"...

You can keep the default map and do an altered copy for the second config. If the trial map didn't work for some reason, you just switch to the default, which is your safety net... OK, on the second copy...reset the max rpms to 6000 as you need and keep whatever the maximum advance is. Just continue...

I disassembled my spare engine. The trigger wheel is approx. 3" in diameter. It has 3 windows. The sensor is a "Halls effect" type. (a powered magnet and seperate sensor with wheel rotating between.) Totally unusable. What I have now is a 3" wheel from a guy on EBAY (with the rig...

I was doing brakes on my pick-up and noticed how similar the ABS sensor was to a VR sensor. The sensor takes impulses from a multi tooth wheel on the back of the hub. The small wheel is made of cheap looking stamped sheet metal which made me think that the sensor was very sensitive. Has anyone tried...

I could not see any use for disconnecting the saw signal.


Ty again, OG

I could not see any use for disconnecting the saw signal.


Ty again, OG

I just bought a used EDIS6 box from this site and the plug/wiring stub on it has (what I describe as) a spout connector in the wire from the 3 rd pin. Red (SAW) wire, black two prong plug in series, gray plug that seems to just make continuity in the 3 rd red SAW wire... was just wondering if it had...

Is there any benefit to leaving the ford spout connector in the loop when wiring a new harness?

Greetings: I have a Taurus sho v6 in a 1930 ford speedster. It is carburated and set up as rear wheel drive. Can my mj unit be triggered by the original crank trigger? Tyvm

So, I guess my iPad is out....lol. Too bad cause it is a powerhouse when compared to a phone. I do have wi fi as well as Bluetooth and 3G. The usb adapter for a camera looks to be handiest. It has possibilities......