Search found 10 matches

by haz87
Mon May 11, 2020 10:15 am
Forum: Installation
Topic: Option Switch
Replies: 1
Views: 3436

Option Switch

Hi All Hopefully a nice quick/painless question. Trying to wire in a map (option) switch on a V4 MJLJ. Grounding to trigger opt2 is obvious, however when using opt1, am I OK to tie this into a 12v feed? Pinning out the option wire from the MJ unconnected, I'm seeing ~5v already. I just wanted to ens...
by haz87
Wed Feb 05, 2014 5:22 pm
Forum: Operation
Topic: Megajolt knackered
Replies: 15
Views: 10505

Many thanks Brent. Will drop an email shortly :)
by haz87
Wed Feb 05, 2014 5:09 pm
Forum: Operation
Topic: Megajolt knackered
Replies: 15
Views: 10505

Repairable?
by haz87
Wed Feb 05, 2014 5:05 pm
Forum: Operation
Topic: Megajolt knackered
Replies: 15
Views: 10505

Yes the MJ was fully connected/wired in
by haz87
Wed Feb 05, 2014 4:52 pm
Forum: Operation
Topic: Megajolt knackered
Replies: 15
Views: 10505

Sorry yes, EDIS pin 1 (PIP?) and pin 2 (diagnostic)
by haz87
Wed Feb 05, 2014 4:50 pm
Forum: Operation
Topic: Megajolt knackered
Replies: 15
Views: 10505

Engine running (stupid i know - was hunting another non mj related issue) the exposed end of Pin 2's wiring touched the exposed solder joint on Pin 1 and yes like i say, sparked. Enough for me to see it as see a small amount of smoke came off it (literally a second before i knocked it off but enough...
by haz87
Wed Feb 05, 2014 4:41 pm
Forum: Operation
Topic: Megajolt knackered
Replies: 15
Views: 10505

Also I'm UK so I'm guessing you can't take a look?
by haz87
Wed Feb 05, 2014 4:39 pm
Forum: Operation
Topic: Megajolt knackered
Replies: 15
Views: 10505

HC = Hard cut additional board When i swapped the wiring i simply changed the coil live (to a 12v rather than it running on the correct pin and through the HC) just like your supposed to. This unit worked perfectly before i was tidying up some wiring n clearly shorted something. The only thing that ...
by haz87
Wed Feb 05, 2014 3:25 pm
Forum: Operation
Topic: Megajolt knackered
Replies: 15
Views: 10505

Hi Brent. Appreciate the reply. No the MJ is doing absolutely nothing other than lighting up its LED. Edis is running the car - tested with a timing light (strangely the wiring was still wired up for the Hardcut limited MJ tho so power was clearly getting around the circuit). This morning i have rem...
by haz87
Tue Feb 04, 2014 9:35 pm
Forum: Operation
Topic: Megajolt knackered
Replies: 15
Views: 10505

Megajolt knackered

Hi guys n gals. Megajolt is fried in some way. Has power (LED illuminates) however the unit won't talk with my laptop at all. Have tried an alternative unit and it talks fine (so i know its not my laptop/serial adapter etc thats gone up the creek). This unit was working fine up until the other night...