Search found 31 matches

by smig
Tue Oct 27, 2015 4:18 am
Forum: Lua Scripting
Topic: Virtual channels greater than 10?
Replies: 2
Views: 2396

toga94m wrote:Looks like us old MK1 people are limited to 10 channels
That would explain it. Thanks.
by smig
Mon Oct 26, 2015 10:34 pm
Forum: Lua Scripting
Topic: Virtual channels greater than 10?
Replies: 2
Views: 2396

Virtual channels greater than 10?

Has anyone been able to added more than 10 virtual channels? I'm in the process of integrating 12 separate data channels via CAN. Everything things was looking good until I attempted to add the 11th channel at which point I got a the log message: vchan: limit exceeded Checking the LUA reference http...
by smig
Sat May 23, 2015 1:13 am
Forum: Hardware and Installation
Topic: Reset RCP?
Replies: 13
Views: 6289

I haven't attempted to connect to 12V. I'll give it a try and report back. No detectable difference when powered with 12V. I do see the light on the BT module go solid periodically, however the app still indicates "Could not detect RaceCapture/Pro" and will periodically show "Searching RaceCaptureP...
by smig
Sat May 23, 2015 12:40 am
Forum: Hardware and Installation
Topic: Reset RCP?
Replies: 13
Views: 6289

Did this happen *immediately* after applying 2.8.2, or did you use it a bit and then something happened? any details around when it happened? Did you drive around, etc? Also, LED behavior is the same whether powered via 12v or usb? Yes this was immediate...I was not able to use it after attempting ...
by smig
Sat May 23, 2015 12:24 am
Forum: Hardware and Installation
Topic: Reset RCP?
Replies: 13
Views: 6289

smig, you're also on MK1 as well, right? Yes MK1. When you plug in to usb on windows while holding down the button, what do you see in Windows device manager? No change in Device Manager. Any USB devices show up, recognized or not recognized? Nothing showing up as either a USB device or an Unknown ...
by smig
Fri May 22, 2015 11:56 pm
Forum: Hardware and Installation
Topic: Reset RCP?
Replies: 13
Views: 6289

Was this ever resolved? I experience the same issue after applying firmware 2.8.2. The RCP will no longer will recognize pressing and holding the button while plugging in the USB to the RCP. Only the power LED lights and the RCP does not show up as a USB device and will not connect via BT to the and...
by smig
Fri Apr 10, 2015 4:54 pm
Forum: RaceCapture App Operation and General Q&A
Topic: User Created Channel Names
Replies: 4
Views: 3716

What I've found is you can add a channel in a script using the addChannel function and call the channel whatever you want. If you add a channel with the same name as an standard channel name it will override the standard channel.
by smig
Wed Sep 24, 2014 1:56 pm
Forum: RaceCapture App Operation and General Q&A
Topic: Firmware Update: "Waiting for device to appear on USB..
Replies: 12
Views: 7176

Re: Firmware Update

Senordan wrote:Anyone have any resolution to the v2 FW update outside of using Linux?
I upgraded to the v2 firmware with XP successfully with no issues, but was not able to connect to the v2 app and ended up going with linux, given that XP is EOL.
by smig
Mon Sep 15, 2014 10:59 am
Forum: RaceCapture App Operation and General Q&A
Topic: RaceCapture App & V2 - Bug list
Replies: 16
Views: 9369

Ls_Rx7 wrote:Does the android app not work with Version 2 yet?
It did work for me. It even showed dynamic channels when I added them. It will stop if there is a lua script error.
by smig
Fri Aug 01, 2014 6:55 pm
Forum: Sensors
Topic: Steering angle sensor- best ideas!
Replies: 35
Views: 24522

jakekooser wrote: I didn't mean to question your specific application.
Hey jakekooser questions are welcome and there is always an opportunity to improve. Until this gets some significant time being driven in anger, anything is possible, including going back to the drawing board. ;)
by smig
Fri Aug 01, 2014 6:37 pm
Forum: Sensors
Topic: Steering angle sensor- best ideas!
Replies: 35
Views: 24522

Is a single turn pot enough? I have some 5-turn pots from some old equipment I was going to use. I think mine is 2.7 lock to lock. Taking into account that gearing 1.33:1 I've got enough for what I want to look at. I decided I wanted more resolution in the region that the wheel should be spending t...
by smig
Fri Aug 01, 2014 6:23 pm
Forum: Sensors
Topic: Steering angle sensor- best ideas!
Replies: 35
Views: 24522

I think it would be a really good fit for a 3d project. I'm not sure what the variations in steering column diameters/dimension are, but a press fit onto my column (94 Integra) would work well and simplify things. If the bracket from the pot was slotted, then it could be made to be pretty generic I ...
by smig
Fri Aug 01, 2014 6:06 pm
Forum: Sensors
Topic: Steering angle sensor- best ideas!
Replies: 35
Views: 24522

by smig
Fri Aug 01, 2014 5:59 pm
Forum: Sensors
Topic: Steering angle sensor- best ideas!
Replies: 35
Views: 24522

Here is the listing for the pot that I used: http://amzn.com/B00HKJ2J08 Unfortunately it appears the price on these have nearly doubled since I made my purchase. It might be worth looking around for a better price or equivalent/similar part. The gears I used came from here: http://amzn.com/B002Q0PA3...
by smig
Fri Aug 01, 2014 6:39 am
Forum: Sensors
Topic: Steering angle sensor- best ideas!
Replies: 35
Views: 24522

After a few minor tweaks it's installed and ready for some testing and calibration:

Image

Image

Image