Autosport Labs

Awesome information, by the way. I've just installed RC/P into our E36 328i and have been pouring over the wiring diagrams for a week. I looked at the fuel gauge plug first because it seemed the most simple, and what was said up above concerning the E30 is exactly how the E36 looks. I'll start an E...

Can you post up details of your RCP install. Thanks!

I did this swap. Let me know if need anything.

https://www.facebook.com/photo.php?fbid ... tif_t=like

Hi, I signed up for the Bluetooth module. I am now just trying to read and understand the telemetry info. A few questions. 1) Can you hook up both since they use the same connector? 2) The telemetry data is going somewhere in the cloud. Can the app on my smartphone receive the data via bluetooth an...

For many racing orgs, they have mandatory timed pit stops, especially when fueling. BMWCCA has 5 minutes wheels stopped rule. Unfortunately it happens more times than not, that you either forget to start the stop watch or something happens to it that you can't rely on it. What would be awesome would...

can this be documented in the installation guide lines

An idea to get more teams to share their R-C.com pages with their social media would be the ability to put links to their sponsors pages. Ie. For a team, have a column somewhere that just lists the team sponsors which would link to the sponsors sites. On this page: http://www.race-capture.com/events...

It looks like all of the analog channels vary a little bit when the fuel level changes, but Analog1 REALLY changes a lot, even though nothing is plugged into it. In fact it changes more then the Analog 2, which is where the fuel wire is plugged into.

-Scott

I have the following hooked up: Pin 1: Ground Pin 2: 12v Power Pin 9 (Analog 6): Coolant Pin 13 (Analog 2): Fuel Pin 15 (GPIO3): Brake switch (not actually connected) Pin 20 (Pulse1): RPM (not actually connected) https://lh3.googleusercontent.com/-KTuKPY7zbd4/UhYnFRNfmyI/AAAAAAAAXN4/q_nwZFN-clQ/w104...

For some reason Analog 1 (pin 14) is showing values and changes with fuel level (plugged into Analog 2, pin 13) even though nothing is plugged it into Pin 14. Other analog inputs are showing some weird stuff even though nothing is plugged into them. Just updated to RA 1.13. http://www.youtube.com/wa...

Thinking about adding a fuel pressure sensor to my BMW E30 M42. $26 80psi. Thoughts?

http://www.ebay.com/itm/Pressure-transd ... d1&vxp=mtr

-Scott

And another sub section to Sensors section where users can post up the sensors they've successfully got to work. Can post where they tapped into the wiring to get the readings as well as what values they used to scale properly. Basically. Ie. BMW E30 Temp Sensor Wire: br/vi; pin 26 on C1 and pin 4 o...

Can you also add a Scripting Sub-Section with a Scripting Help section and a Canned Scripts section. The point of the Canned Scripts section is to share scripts people have wrote or found that are known to work and could be useful to others. Basically kinda like the Auto-Start Stop Script that you g...

Can you also add a Success Stories or similar section? The more I use RCP+T the more cool ways I'm finding its useful.

-Scott

http://www.race-capture.com/events/lemo ... -1/summary

The RPM values are a little wonky. If you look at the Max RPM line, when the line goes down to 0, it says the max RPM was in the 20,000+ rpm range.

-Scott