Search found 18 matches

by TrackRat
Thu Sep 26, 2013 3:37 pm
Forum: Bug Reporting
Topic: RPM value about 3x higher than actual
Replies: 16
Views: 17024

Aside from the latest firmware, what was the outcome on this? Setttings for a 6 cylinder?
by TrackRat
Mon Aug 05, 2013 2:53 am
Forum: RaceCapture/Pro General Q&A
Topic: Website to see the telemetry download live?
Replies: 2
Views: 3785

After you create an account, it will be under events on: http://www.race-capture.com/
by TrackRat
Sun Aug 04, 2013 10:45 pm
Forum: RaceCapture/Pro General Q&A
Topic: Writes to device fail with unspecified error at 92%
Replies: 3
Views: 4385

I updated my firmware to the latest and the issued cleared. Now it will 'write' completely.

Which firmware do you have on yours?
by TrackRat
Sun Aug 04, 2013 10:44 pm
Forum: Hardware and Installation
Topic: Problem installing the USB-to-serial driver
Replies: 9
Views: 9090

Running into a similar issue. Had the USB to Serial deriver working. Loaded the bootloader to re-flash the unit. Now it won't show up as a 'port'. Did the 'uninstall' and on the second try, it unloaded and found the correct driver again.

Everything is working fine after that.
by TrackRat
Sun Aug 04, 2013 10:05 pm
Forum: RaceCapture/Pro General Q&A
Topic: Writes to device fail with unspecified error at 92%
Replies: 3
Views: 4385

I just ran into the same issue...troubleshooting now
by TrackRat
Fri Jul 26, 2013 3:56 pm
Forum: RaceCapture/Pro General Q&A
Topic: CAN bus & ECU support plans
Replies: 28
Views: 37166

brentp wrote:Yes! The top two current projects are the bluetooth modue + android app, plus a CAN interface via the hardware expansion port. Watch for news on this within the next few weeks!
Need an iOS app version. Any programers willing to port the Android work over to iOS?
by TrackRat
Fri Jul 26, 2013 3:55 pm
Forum: RaceCapture/Pro introductions
Topic: RCP and RT - "training wheels" in central Indiana
Replies: 1
Views: 2810

Welcome Ian!
by TrackRat
Fri Jul 19, 2013 2:20 am
Forum: Sensors
Topic: RCPro AFR reading differs from Innovate Motorsports DB gauge
Replies: 8
Views: 8206

I have had issues with Innovate reading a little low with their LC1 package. I did a somewhat similar test with actual measured vs Innovate vs AEM's and found the the actual and AEM read the same and Innovate a little low. Not sure that helps, but does confirm that Innovate does read low sometimes.
by TrackRat
Thu Jul 18, 2013 7:03 pm
Forum: Sensors
Topic: Ride Height Sensor
Replies: 14
Views: 19735

What was the resistance values and what did you use for the pull down?
by TrackRat
Thu Jul 18, 2013 7:01 pm
Forum: RaceCapture App Operation and General Q&A
Topic: Race Analyzer 1.1.12 released
Replies: 2
Views: 3394

Will this support MetroPCS? They maybe the cheapest monthly service rate...
by TrackRat
Wed Jul 17, 2013 3:35 pm
Forum: Sensors
Topic: Ride Height Sensor
Replies: 14
Views: 19735

brentp wrote: Any idea on the connector?
Not sure on the connector. Not sure where to get that one.
by TrackRat
Wed Jul 17, 2013 3:23 pm
Forum: Sensors
Topic: Ride Height Sensor
Replies: 14
Views: 19735

Future reference, you can get all the wiring diagrams for BMW's here:

http://www.bmw-planet.com/diagrams/

Pretty handy site.
by TrackRat
Wed Jul 17, 2013 3:19 pm
Forum: Sensors
Topic: Ride Height Sensor
Replies: 14
Views: 19735

Ride Height Sensor

I posted the pin out on the FB post, but here is the actual diagram from the book. Looks like only pins 1,4, and 5 are used. Leads on 1 and 5 with the wiper arm on 4. Not sure the values.
by TrackRat
Tue Jul 16, 2013 1:36 am
Forum: RaceCapture/Pro General Q&A
Topic: How to get RPM on BMW E30 M42 DIS.
Replies: 33
Views: 31616

sbarton wrote:Hey Brian,
Can you give me the scaling values for fuel and coolant on your E30?

-Scott
Yes, about to do an install on an E30 - that would most helpful!
by TrackRat
Wed Jun 12, 2013 8:29 pm
Forum: RaceCapture/Pro General Q&A
Topic: How to get RPM on BMW E30 M42 DIS.
Replies: 33
Views: 31616

Warning : This negative lead connected to the ignition coil has a 500v voltage spike that RaceCapture/Pro isn't designed to handle. ... We are working to release a small adapter board that can safely interface this coil signal to RaceCapture/Pro's pulse input. The technical information can be found...