Search found 29 matches

by Shiftlink
Fri Nov 30, 2018 5:54 pm
Forum: Hardware and Installation
Topic: RC App on RasberryPI 3 running Raspian OS
Replies: 15
Views: 8365

In case anyone has the same question, the threads are 3mm x 0.5

My local mom n pop hardware store actually had them in stock in a few different lengths.
by Shiftlink
Tue Nov 27, 2018 9:59 pm
Forum: Hardware and Installation
Topic: RC App on RasberryPI 3 running Raspian OS
Replies: 15
Views: 8365

Does anyone know what size the screw bosses on the official pi 7" display are? I found some that fit in my computer parts junk drawer, but I need to find some that are about 3mm longer than those.
TIA
by Shiftlink
Fri Oct 05, 2018 9:58 pm
Forum: Sensors
Topic: Miata Fuel Gauge set up
Replies: 11
Views: 6802

Following up on this, most guys aren't running stock instruments. In this case a voltage divider to the sensor will work fine with a custom calibration, correct? Just double check ground to make sure everything is happy.
by Shiftlink
Sun Dec 31, 2017 9:51 pm
Forum: CAN mapping discussion
Topic: VAG CAN information.
Replies: 5
Views: 6613

I added a file to that, the PWC base config for VW, that is the motec config file for a C125 dash.

You can download the dash manager software from this link:
http://www.motec.com/filedownload.php/C ... docid=5483
by Shiftlink
Sun Dec 31, 2017 9:47 pm
Forum: CAN mapping discussion
Topic: VAG CAN information.
Replies: 5
Views: 6613

Okay, here's a link in case someone wants to help out. Three files, one is a motec dash looking to hook up with a VW, one is the VW alone, and one is the motec dash and the VW getting it on.

Here's the link:
https://drive.google.com/drive/folders/ ... sp=sharing
by Shiftlink
Sun Oct 22, 2017 10:32 pm
Forum: CAN mapping discussion
Topic: VAG CAN information.
Replies: 5
Views: 6613

Here's a data dump i harvested today from an ME7.1.1 ecu using VCDS

https://drive.google.com/open?id=0B2bnR ... FJEa0dtTGc
by Shiftlink
Mon Aug 21, 2017 10:58 pm
Forum: CAN mapping discussion
Topic: VAG CAN information.
Replies: 5
Views: 6613

VAG CAN information.

I found some interesting info on the VAG CAN bus. We know that the CAN bus is filtered by the CAN Gateway and that almost nothing will appear at the OBD2 port without being requested. There are three busses that can be sniffed behind the gateway; powertrain, infotainment, and Comfort. I haven't spen...
by Shiftlink
Fri Feb 24, 2017 10:37 am
Forum: RaceCapture/Pro General Q&A
Topic: Mazda MX-5 NC ('06 - '15) PIDs
Replies: 1
Views: 2094

Thank you! I'm sure that will come in useful.
by Shiftlink
Sun Jan 01, 2017 2:41 pm
Forum: Lua Scripting
Topic: Need help pulling CAN data
Replies: 4
Views: 3299

I think it's possible that you are only looking at the diagnostic CAN-Bus if you are plugged into the OBDII port. The MK7 VW has 7 CAN-Buses. I think you may have more success if you connect to the powertrain CAN-Bus directly. You will need to find the CAN Gateway module and connect to CAN hi and CA...
by Shiftlink
Sat Dec 31, 2016 2:40 pm
Forum: Hardware and Installation
Topic: RCP2 installed in a VVT Spec Miata
Replies: 2
Views: 2055

RCP2 installed in a VVT Spec Miata

Hey guys, I just thought y'all might enjoy seeing the installation I just did last week. I think it turned out pretty well. I'm really happy with the results that we got using AEM sensors with the Pro2. I just bought one of the new RaceCapture devices for my own car, and I'm having a little bit of r...
by Shiftlink
Sat Dec 24, 2016 8:07 pm
Forum: Lua Scripting
Topic: Improved script for staged, variable blinking ShiftX light
Replies: 7
Views: 3387

I guess I should mention that I'm working with an RCP2 for this.

No jumpers to swap, When I copy in your script without the virtual channels and some of the comments I hook the lights up, they just stay on all the time, I guess I need to figure out the settings in set-up on those channels.
by Shiftlink
Sat Dec 24, 2016 6:36 pm
Forum: Lua Scripting
Topic: Improved script for staged, variable blinking ShiftX light
Replies: 7
Views: 3387

I would like to do what you are doing here, I just want to make sure I understand a couple of things. Your virtual channels are not being used for controlling ShiftX, correct? This is just something you've added because you want it, I think. Are you using the three Digital I/O's or the Pulse/Analog ...
by Shiftlink
Fri Nov 25, 2016 8:37 pm
Forum: RaceCapture App Operation and General Q&A
Topic: What is the status of RCP Analysis?
Replies: 57
Views: 20918

In that case, the session recorded on the fly can be exported and re-imported into another app, say 'the master app' running on a laptop. This scenario still avoids the need to pull SD cards. The next goal is to have the ability to push/pull sessions to your Podium account which will automatically ...
by Shiftlink
Fri Nov 25, 2016 8:30 pm
Forum: RaceCapture App Operation and General Q&A
Topic: What is the status of RCP Analysis?
Replies: 57
Views: 20918

You have a MK1 RaceCapture/Pro ? The system has come a long way since then, especially the app / analysis features! Still, we've ensured the latest app will work with the MK1. I do, looking at replacing some systems in other cars with the new stuff and doing whatever is needed to have both of the c...
by Shiftlink
Fri Nov 25, 2016 8:28 pm
Forum: RaceCapture App Operation and General Q&A
Topic: What is the status of RCP Analysis?
Replies: 57
Views: 20918

Oh I misunderstood your question. Different car of the same type. same sessions two cars.