Autosport Labs

I managed to get the rpm signal from Honda B series without any other external electronics. Tap the signal from ICM wire I believe its A21 on OBD1 socket. Settings would be 4 signal per rev.

Found that the basic script especially at high rpm is not stable and the light jump to and from the cutoff point. Below script gives a more stable shift light by averaging the rpm and having different on-rpm and off-rpm. setTickRate(30) a = 0 y = 0 function onTick() if getGpsSpeed() > 10 then startL...

I'm trying to upgrade the firmware using the bat file provided. Somehow when I plug in the USB with the button pressed (3 Green led ligthed up) the device is detected as USB Input Device, Instead of Autosport Bootloader. I do really want to avoid opening up the case and do a fresh update. Am I doing...

Agreed with this. BUMP!!!!

This blank data is creating alot of issue when converting it to another file format.

I'm trying to convert the csv to VBO format for vbox circuit tools. It is missing a couple of item such as heading, altitude, altitude precision, coordinate precision. Give the vbox circuit a try, its free and very useful in analyzing the race data

Problem solved apparently i didnt wait long enough for gps lock.

I was outdoor standing for half an hour with the laptop and racecapture. Tried to plug and unplug the gps receiver blink red once and thats all no other indication its working. Is there any place i can check that at least race capture is communicating with gps module?

I'm unable to lock into GPS, do I need to provide racecapture with 12V or the usb voltage is enough?