Search found 11 matches
- Tue Sep 10, 2019 6:18 pm
- Forum: RaceCapture App Operation and General Q&A
- Topic: RCP MKIII data logs are fragmented
- Replies: 1
- Views: 5306
RCP MKIII data logs are fragmented
Hi there, I've recently purchased a RCP MKIII to replace my original RCP. Unfortunately, it doesn't seem to log properly and I cant work out why. I did a track day today and recorded three sessions (approx 15mins each) on my gopro and the same three sessions on the RCP data logger (I pressed the red...
- Tue Aug 27, 2019 5:29 pm
- Forum: CAN mapping discussion
- Topic: Honda K20 (in Ariel Atom) with Hondata Flashpro
- Replies: 4
- Views: 7943
It's not clear to me that the FlashPro sends the same data as the KPro produces from Hondata boards. The KPro and S300 are add-in boards, with their own CAN bus output (at least in the case of the S300). But before giving up on this, I would load the KPro Preset into RCP Setup/CAN Mapping, change t...
- Mon Aug 26, 2019 9:36 am
- Forum: CAN mapping discussion
- Topic: Honda K20 (in Ariel Atom) with Hondata Flashpro
- Replies: 4
- Views: 7943
Is your HonData configured to send CAN data? You should verify that the correct CAN bus speed (baud rate) is set. I suspect the HonData is 500k baud, but am not certain. Perhaps you can find someone knowledgeable with the CAN bus to help you. I would connect one of my CAN inspection tools (or write...
- Sun Aug 25, 2019 11:35 am
- Forum: CAN mapping discussion
- Topic: Honda K20 (in Ariel Atom) with Hondata Flashpro
- Replies: 4
- Views: 7943
Honda K20 (in Ariel Atom) with Hondata Flashpro
Hi All, I recently upgraded my original Racecapture Pro and purchased the latest Racecapture Pro MK3 and CAN-OBDII cable. I was hoping to use this on my UK Ariel Atom which uses a supercharged Honda K20 engine. It runs the standard Honda ECU plus a Hondata Flshpro (which is needed for tuning the ECU...
- Wed Mar 05, 2014 8:31 pm
- Forum: RaceCapture App Operation and General Q&A
- Topic: Please help me with setting up/configuration
- Replies: 9
- Views: 8661
- Sun Jan 26, 2014 1:21 pm
- Forum: RaceCapture App Operation and General Q&A
- Topic: Please help me with setting up/configuration
- Replies: 9
- Views: 8661
- Mon Jan 20, 2014 9:19 pm
- Forum: RaceCapture App Operation and General Q&A
- Topic: Please help me with setting up/configuration
- Replies: 9
- Views: 8661
Do you have any idea how long it will be until a new software version is released to correct this? Should I also be able to set the Max speed and rpm values? The default values are 10000rpm and 240mph, sadly my car won't do either! Should I be able to change these values to something more suitable ...
- Thu Jan 16, 2014 8:33 am
- Forum: RaceCapture App Operation and General Q&A
- Topic: Please help me with setting up/configuration
- Replies: 9
- Views: 8661
Hi, Thank you for the comment the feedback! the documentation has changed from RAW to actual volts, as that makes more sense to people. The easiest way to calibrate the throttle position is to set the calibration to the simple linear scale for 0-5v and then use the sensor monitor to record the valu...
- Tue Jan 14, 2014 9:08 pm
- Forum: RaceCapture App Operation and General Q&A
- Topic: Please help me with setting up/configuration
- Replies: 9
- Views: 8661
Re: Please help me with setting up/configuration
Hi again, I've managed to map the RPM/tacho feed by asking for help on other car forums and getting responses there. However, I would still like to find an answer to one of the issues in my original post: Greetings from the UK :) Also, when I try to import data from the SD card in my Race Capture Pr...
- Wed Jan 01, 2014 4:48 pm
- Forum: RaceCapture App Operation and General Q&A
- Topic: Please help me with setting up/configuration
- Replies: 9
- Views: 8661
Hello again :) Just to update you all, after a whole day spent in my garage, through trial and error I believe I've managed to get the throttle position logged correctly using the following parameters: http://s28.postimg.org/69dy5lnil/image.jpg However, if anyone could answer my other questions I wo...
- Tue Dec 31, 2013 8:41 pm
- Forum: RaceCapture App Operation and General Q&A
- Topic: Please help me with setting up/configuration
- Replies: 9
- Views: 8661
Please help me with setting up/configuration
Greetings from the UK :) I recently purchased a Race Capture Pro and this is my first experience of data logging, I wonder if any of you guys could kindly help me out with a few issues I've got the RCP powered up and updated to firmware 1.2.6, I'm running RaceAnalyzer 1.1.14. I'm trying to configure...