Search found 3 matches

by Rogerd
Wed Jun 08, 2016 3:49 pm
Forum: Installation
Topic: Total sparkless cut outs that seem random
Replies: 2
Views: 3648

Well, after being overwhelmed by the responses I spoke to Chris at triggerwheels and he suggested the EDIS unit might be overheating. I removed it from my fibre glass bulkhead and attached a piece of aluminium to it (3mm thick, same with as the EDIS and 9inches long). Problem so far has gone away......
by Rogerd
Sun Jun 05, 2016 4:55 pm
Forum: Installation
Topic: Total sparkless cut outs that seem random
Replies: 2
Views: 3648

Total sparkless cut outs that seem random

So I've got a prebuilt MJ (not home soldered) running an Edis 8 with two coil packs (RV8). Been running flawlessly since installation and initial trouble shooting (had a loose connection on the live feed to the EDIS). All sorted. A couple of weeks ago during the MOT the garage could not start the ca...
by Rogerd
Fri Jun 05, 2015 5:08 pm
Forum: Installation
Topic: Got a harmonic vibe and getting cut outs
Replies: 1
Views: 3599

Got a harmonic vibe and getting cut outs

Just installed my MJ into a rover V8 with Eddy carbs. All seemingly was mostly ok but then got misfires and eventually found the VR sensor plug had come loose. Plugged it back in. Made doubly sure it's ok. I have a few issues: 1) I have a new harmonic vibration that starts around 1500 and goes throu...