Autosport Labs

Brent,
any update on the availablity of Beta units yet, now moving into off season and testing

Brent on the software side for circuit racing i would consider track mapping using the GPS as a must have feature.

Am very interested in this project for our race team, we have been looking at data capture this season and this ticks all the boxes plus some we hadnt thought of! Have signed up for beta testing. I personally would vote for the accelerometer to be on board, i think it would make for a more robust in...

Brent, any news on this yet? As i understand it the V3 board is ready for it but the firmware needs updating, any news on a release date yet?
Mac

Still no news on map switching on V3 boards anyone?

Mac

Any news on aq completed software release for map switching yet anyone?
Mac

Hmmm, dont know how i fixed it but i have!¬! must have been a dodgy wiring joint as it all worked once i checked them all for the third time!! Well happy

Ok so got everything hooked up and can see the tps readings in the runtime display. The rpm reading however just shoots to 19k or more on cranking and then refuses to come down to 0 when i stop cranking, have adjusted the vr sensor gap as tight as i can, Any ideas? The only other thing is that my vr...

Am about ready to fire upo but my coil pack doesnt have any markings to tell me which plug is which!
I am fitting it to a crossflow, anyone got any pics of which plug lead goes where?

Mac

I got a brand new Weber TPS kit off ebay for £25!!!! But i beleive that the TPs of a mondeo will fit but you have to make up the bracket, check out:

http://www.cate1.co.uk/megajolt/installation.php

Mac

Think you might have seen this already but for any that havent:

http://boardroom.wscc.co.uk/cgi-bin/iko ... ntry321114

Also after this info, might have to start designing my own otherwise!!!

Mac

download hc08sprg.exe from the downloads section and the latest firmware as well mjlJunior.s19 connect the board with the chip on it but leave powered off go to a command prompt an change to the directory that you saved the 2 files to. Type the following command line, it presumes that you have the b...

would be interested if you get a reply as i am looking for the same info.

Mac

any news on a proposed release date yet?

regards
Mac