Autosport Labs

After several tries, was able to write an old config.

I'm getting an error reading configuration over both USB (Windows) and Wi-Fi (Android -- application gets part of config loaded, then fails. Application log attached. I had been playing with CAN setup a bit before this happened.

When autocrossing, the time between a given event (speed, RPM, or whatever) and the starting line can be very short. In ProSolo (or drag racing for that matter), where it's a drag tree type start, it is likely that you'll want the camera running before most automatic events would fire. Would it be p...

After a Track Night in America at Pacific Raceways last night, I'm seeing good data for laps 1-3, then a 7 minute lap for lap 4, then a lap 5 back to normal time. I see this fairly regularly, mostly good data with one bit that's really wacky. GPS is set to 25 hz, but I didn't see any significant dip...

OK, this one is so simple it's hardly worth posting, but perhaps it will provide some ideas. A while ago I added a 12v outlet inside the center console, so dropping the RC in there was pretty simple with a bit of industrial strength velcro (may switch to the "Scotch" fastener at some point...

Session name length is better, not sure how much more you could go with limited screen real estate. I'll just have to remember to keep the "general" part of the session name short.

Currently fits "AccelX 2017 Pro solo - ".

Thanks,
Tim

Going into analysis mode is still a bit slow, as is bringing up the list of saved sessions (improved, but still a bit slow). Running on a Nexus 6. Odd behavior I saw on previous versions where hitting "save" during log export while the keyboard was still open navigated directory instead of...

Ran a pro-solo yesterday, looking for options on better support for dual-course events * Auto stop / start on "autocross" course when start / finish is crossed * Auto selection for left / right course even when starting line is < 20' left / right of other course * Log name showing left / r...

I find analysis difficult even on my Nexus 6 screen, so I tend to export the logs post-event and analyze them on a PC. However, there is not an easy way to export multiple logs. * Move export functionality out of analysis area for easier access * Provide for multi-log export in one operation * Defau...

Getting the exact same error on OSX, works fine on PC.

After talking with Brent, the software should be able to update the firmware regardless of other connection state. Reloading the firmware via the software worked, though I'm sure I had tried that previously.

Did exactly the same thing (RC/Pro onto RC), will try again over wifi when I get home, that didn't seem to work for me the first time I tried.

I accidentally grabbed the RaceCapturePro firmware download rather than the RaceCapture. The upgrade failed with error #3. Now I am unable to see the RC on a USB connection from either Mac or Windows computers.

RaceCapture shows rapid blinking green LED.

Help!