Autosport Labs

Sorry Mike I completely missed your post. I plugged that script it and I works. Thank you so much. Like mitch said we can now use that script for reference moving forward. Next step will be trying to get tips data which from what mitch tells me it goes to 3 different locations so it may be a little ...

I removed the { and } characters and it gave me the same error

So Mitch had me load this script for steering angle --Testing for Josh Chapin --Steering angle test --how frequently we poll for CAN messages tickRate = 30 --the CAN baud rate CAN_baud = 500000 --CAN channel to listen on. 0=first CAN channel, 1=second CAN_chan = 0 --add your virtual channels here --...

Ok finally I got CAN data. I have some questions on how I got it though. First Mitch sent me another cable with only one channel which could be it but I don't think so. Second I'm wondering if this whole time using my tablet was the problem instead of hooked up to the laptop with the cable? Third wh...

Sorry I haven't replied for awhile. Work has been crazy. I will try and get that to you soon Brent. Thank you again guys for the help.

I cleared everything hit write and then read. After it read the configuration nothing showed up so I then added this script -- Log messages from CAN bus -- be sure to set the correct baud rate in the CAN settings -------------------------------------------------- -- change this to 0 for CAN bus 1, o...

Brent, I will try that tonight. I have the mk2 so no orange light on mine.

Ok I think I missed writing the script to the rcp. So I retried the script and I got GPS: successfully configured NMEA GPS: configure message type: win Stuff like that then a bunch of [LUA] gracefully stopping Kia task [LUA] Destroying Lua state [LUA] Initializing Luna state [LUA]Memory usage 16kb [...

I'm pretty sure only this was in the white box -- Log messages from CAN bus -- be sure to set the correct baud rate in the CAN settings -------------------------------------------------- -- change this to 0 for CAN bus 1, or 1 for CAN bus 2 canBus = 0 ------------------------------------------------...

Well I can't seem to post a pic to save my life. [LUA] gracefully stopping Lua task [LUA] destroying Lua state [LUA] initializing Lua state [LUA]memory usage 16k [LUA]loading script length 2130 [Can device] initializing can with baud rate 5000000 [Can device] can input success [Lua] successfully loa...

so I tried the script and I did get some stuff in the black box. Not letting me upload the pic but it said "GPS:" a bunch of times with things like configuring baud rate.

Thank you for the reply. The car in question is a Mercedes 2006 e55. Is does have CAN and I am accessing it using a cable he sent me.

I will give it a try tomorrow. Thank you

--This example configured for E55 W211 CAN --how frequently we poll for CAN messages tickRate = 30 --the CAN baud rate CAN_baud = 500000 --CAN channel to listen on. 0=first CAN channel, 1=second CAN_chan = 0 --1 for Big Endian (MSB) mode; 0 for Little Endian mode (LSB) be_mode = 1 --add your virtual...

So I know nothing about CAN or LUA scripting. I was swayed by a buddy to buy the RCP for its ability to read CAN data. So here I am in a area I know nothing about. So.... First off I will say that at this point I am only trying to read ecu data for tunning purposes. Mostly interested in getting RPM,...

Sorry for the ignorance but how do I check the log for errors?