Search found 280 matches

by cng1
Sun Jun 22, 2014 11:45 am
Forum: Installation
Topic: TESTING Megajolt
Replies: 22
Views: 13136

A smaller gap would be better, 0.75mm with a maximum runout of 0.25mm is a good target.
by cng1
Sun Jun 15, 2014 5:39 pm
Forum: Installation
Topic: TESTING Megajolt
Replies: 22
Views: 13136

If you are seeing erratic RPM then my bet is that your trigger wheel is not properly centered. Looking at your pictures it looks like your wheel is not mounted using a centralising hole so you will have a much harder time centering it. Measure your runout, my bet is that you have rather more than th...
by cng1
Thu May 08, 2014 6:35 am
Forum: Installation
Topic: Megajolt Spark Plug Conversion
Replies: 2
Views: 3236

Hi,

You should have got some instructions with the adaptors which explain how you fit them but if not let us know and we can send you another copy of them.

The terminal fits in the rubber with a 90 degree bend formed at the indentation just below the cable crimping tabs. Does that make sense?
by cng1
Fri Apr 18, 2014 10:23 am
Forum: General Discussion
Topic: Shipping Charges.
Replies: 3
Views: 4040

Since you're in the UK you may find it cheaper and simpler to order from us at trigger-wheels.com as we carry the stock and being based in the UK shipping should be a lot cheaper and there is no import fees to worry about
by cng1
Thu Apr 10, 2014 9:46 am
Forum: Operation
Topic: Changed to new laptop setting up issues.
Replies: 10
Views: 7207

That is strange. I wonder if your copy of Windows or Internet Explorer is corrupting the download in some way.

Would it be possible for you to try the download on a different web browser - say Chrome or Firefox and see if that works.
by cng1
Tue Apr 08, 2014 10:02 pm
Forum: Operation
Topic: Changed to new laptop setting up issues.
Replies: 10
Views: 7207

I don't believe that the 4.0.0 configurator software will work with the 4.0.2 firmware that I suspect that you have on your ECU. The 4.0.2 configurator download seems to work OK at present from the web site: http://autosportlabs.net/MJLJ_V4_Downloads
by cng1
Tue Apr 01, 2014 1:15 pm
Forum: Sensors
Topic: Driver Temp
Replies: 2
Views: 2742

The temperature sensing pills are single use (for fairly obvious reasons) and both they and the receiver are expensive pieces of kit. The usual way to do temperature monitoring of this kind without the radio telemetry pills would be with a rectal probe but I can't imagine that your drivers will be t...
by cng1
Thu Feb 13, 2014 10:45 pm
Forum: Assembly
Topic: Tps to map conversion
Replies: 2
Views: 4762

No, you cannot add an on-board MAP sensor to your ECU. You can however run an external MAP sensor in place of the TPS.
by cng1
Sat Feb 01, 2014 9:31 am
Forum: Ignition Map Library
Topic: MAP for a RV8
Replies: 1
Views: 5441

Hi Mark,

I've only just seen this mesage. There are Rover V8 maps on the CD you receive with the package. Please get in touch if you have any problems.
by cng1
Sat Feb 01, 2014 9:26 am
Forum: Installation
Topic: retain original ignition as a fallback ?
Replies: 3
Views: 3934

We've supplied Megajolt systems to many people doing long duration, unsupported expeditions. For their first event they typically want a spares package plus they leave the original ignition set up so it can be swapped in if need be. Come their second event the dizzy etc has almost always been binned...
by cng1
Sat Feb 01, 2014 9:16 am
Forum: Installation
Topic: Values for fuses recommendation
Replies: 8
Views: 6757

The Megajolt is low current so should be on a separate low-rated fuse, 5Amp is overkill for that really. The EDIS and coils are the bits that needs the higher current fuses. In general people connect both EDIS and coils to a single fuse, 10A should be fine on a 4-cylinder setup but with dual coils I...
by cng1
Sat Feb 01, 2014 9:12 am
Forum: Installation
Topic: Multiple Tach Signal outputs
Replies: 2
Views: 3231

It will probably work but I'd recommend keeping things separated if possible. Why not feed the Innovate from the Megajolt or EDIS tach output?
by cng1
Wed Jul 24, 2013 10:08 pm
Forum: Installation
Topic: Rover V8 14 cux Install Help!!!!
Replies: 1
Views: 3785

You will need a tacho adaptor to feed the 14CUX from the coils, otherwise you'll have spark but no fuel!
by cng1
Sun Jun 30, 2013 11:11 am
Forum: Q&A
Topic: Next newbie question, coil packs
Replies: 2
Views: 3006

The Escort/Fiesta/Mondeo/etc coil packs are all interchangeable as far as EDIS/Megajolt is concerned.
by cng1
Fri Jun 28, 2013 2:52 pm
Forum: Q&A
Topic: Different systems
Replies: 3
Views: 3315

There's no purchase required to change the map - you just do it! The software is free and the mapping cable should come with the ECU.