Search found 39 matches

by davef_dci
Sat Apr 10, 2021 7:20 pm
Forum: Telemetry
Topic: Recommendations on a data plan / sim card?
Replies: 2
Views: 4235

Recommendations on a data plan / sim card?

Help / Bummer..... we've now tried AT&T, Verizon and T-Mobile and none of them will support or work with our 3G Racecapture Pro MK3. Are we out of luck? Does anyone know if there are any options or is our MK3 no longer usable with cellular? Bumping this in hope of a fix. We have one of the origi...
by davef_dci
Wed Aug 21, 2019 4:41 am
Forum: Lua Scripting
Topic: Problems accessing Data from Mega Squirt in LUA. Any advice
Replies: 3
Views: 5993

Problems accessing Data from Mega Squirt in LUA. Any advice

Three days to race and I’m battling some RaceCapture issues and could use some help. Running Racecapture MK3 in a Neon that’s controlled with a Megasquirt. I am transferring data from the Megaquirt to Racecapture via canbus. I have an android tablet in the car that is displaying gages including RPM,...
by davef_dci
Tue Apr 02, 2019 3:29 pm
Forum: CAN mapping discussion
Topic: Megasquirt integration question...
Replies: 1
Views: 2768

Megasquirt integration question...

Howdy, I'm confused about the following statement in https://wiki.autosportlabs.com/Megasquirt_CAN RaceCapture/Pro MK Use the CAN High and Low connections from either CAN1 or CAN2 on the 24 pin Molex harness. Typically CAN1 is used, so you would use CAN 1 High and CAN 2 HIgh . Shouldn't this say... ...
by davef_dci
Mon Mar 25, 2019 11:29 pm
Forum: ShiftX2
Topic: Advice on wiring ShiftX3, ShiftX2 and MegaSquirt
Replies: 2
Views: 6190

Bump

Bumping this - any guidance for me on this? As a reminder - trying to run ShiftX2, Shift X3 (via CAN2) and MegaSquirt (via CAN1). Please see the attached wiring diagram. Does this make sense? I also need some help on the jumpers. I'm assuming I would cut the terminating resistor jumper on the ShiftX...
by davef_dci
Sun Mar 17, 2019 11:07 pm
Forum: ShiftX2
Topic: Advice on wiring ShiftX3, ShiftX2 and MegaSquirt
Replies: 2
Views: 6190

Advice on wiring ShiftX3, ShiftX2 and MegaSquirt

Greetings, We run RaceCapture MK3 and an Android tablet for display. Previously we were running off of a Chrysler ECU and all inputs to the Race Capture for sensors were coming in via a manually created wiring harness and discrete input wiring. We were also running a ShiftX2 and this was also wired ...
by davef_dci
Tue Feb 05, 2019 4:44 am
Forum: Lua Scripting
Topic: Trig functions?
Replies: 1
Views: 4820

Trig functions?

Howdy, does anyone know if LUA scriping supports trig functions (sin, cos, tan, etc)???

Thanks
by davef_dci
Mon Sep 03, 2018 1:41 pm
Forum: RaceCapture/Pro General Q&A
Topic: Can you confirm that AccelX forward?
Replies: 1
Views: 6788

Can you confirm that AccelX forward?

Howdy, Our MK3 is mounted "conventionally" (upright on the dash with the front panel facing towards the driver). In looking at our telemetry, AccelZ is clearly up and down but I'm not positive which of the Accelerations is in the direction the car is travelling - I'm assuming this is Accel...
by davef_dci
Mon Sep 03, 2018 12:55 pm
Forum: Lua Scripting
Topic: Looking for help with out of memory errors
Replies: 4
Views: 9550

Looking for help with out of memory errors

Paulo, Thanks for your response. I originally started using the ShifX2 Alert routines but I quickly began to run into memory errors (the program would run for a brief period of time and then go into Disco Light mode). I tried simply turning on the end LEDS manually in the event of a warning/danger a...
by davef_dci
Mon Aug 20, 2018 12:43 am
Forum: Telemetry
Topic: Can you compare Laps from different events on Podium?
Replies: 1
Views: 5286

Can you compare Laps from different events on Podium?

Hey folks,

Is there a way on Podium to compare laps from different events? My podium account still retains an event from last year at the same track - I'd love to overlay it with a lap from this year. Any way to do this?

Dave
by davef_dci
Sun Aug 12, 2018 6:07 am
Forum: Lua Scripting
Topic: Looking for help with out of memory errors
Replies: 4
Views: 9550

Looking for help with out of memory errors

Hey folks, I am trying to implement some Shift2X stuff and my program has begun to behave weirdly. I was getting sporadic out of memory errors and I cut out some stuff - but the program will run for a while and then act up oddly which I am assuming means out of memory stuff. I'm pretty novice at LUA...
by davef_dci
Thu Mar 29, 2018 2:41 am
Forum: Hardware and Installation
Topic: Options for powering RaceCapture - OBDII vs Terminal Block.
Replies: 1
Views: 5596

Options for powering RaceCapture - OBDII vs Terminal Block.

Howdy, I think this has been covered on here before but I can't find it. I'm running a RaceCapture MK3 in a Chump Car. We are attempting to use the Legacy OBDII cable so we can see some data from our ECU. The OBDII cable does a fine job powering up the MK3, but our race regulations require that we s...
by davef_dci
Wed Oct 18, 2017 2:28 am
Forum: Sensors
Topic: Slow response on digital brake input?
Replies: 2
Views: 7277

Slow response on digital brake input?

Hey folks, I'd assume I'm having a basic electrical engineering brain cramp here but could use some debugging advice. I have the brake switch input wired through a 10K resistor into GPPIO(1). this is mapped to a virtual channel Brake_stat. When I press the brake, Brake_stat immediately goes to 1 - b...
by davef_dci
Tue Oct 17, 2017 11:17 pm
Forum: Lua Scripting
Topic: Unable to see virtual channels inside Race Capture?
Replies: 1
Views: 4129

Unable to see virtual channels inside Race Capture?

Howdy. I suspect I have a conceptual block but I'm working on a LUA script that creates several virtual channels. When I upload this to my Race Capture Pro unit I'm not able to configure any of the dashboard gages to report out on the virutal channels. They're not appearing on my list of available c...
by davef_dci
Tue Oct 17, 2017 4:06 am
Forum: RaceCapture App Operation and General Q&A
Topic: What is the latest version of the Windows race capture app?
Replies: 2
Views: 4621

Bah! My fault. On my computer it turns out that i need to manually uninstall older versions of race capture. If I update to version 11 it keeps the old version and the new versin as opposed to overwriting the older version. When i went to start > Racecapture on my windows 11 machine it would automat...
by davef_dci
Tue Oct 17, 2017 4:03 am
Forum: RaceCapture App Operation and General Q&A
Topic: What is the latest version of the Windows race capture app?
Replies: 2
Views: 4621

What is the latest version of the Windows race capture app?

Howdy, when I go to the download section of AutoSports Labs it tells me that the latest version is 1.11.0 When I open up my RaceCapture application on my Windows computer and check under System Status it says I'm running version 1.8.0. I tried updating race capture but the system status still says 1...