Autosport Labs

I can get the info via OBD2 channels. If this data is pulled just as fast as going the CAN channels route then you would be correct, I'm making it harder than I need to. I was under the impression we wanted to use CAN channel route over the OBD2 channels when possible due to the data rate, and other...

Those were just the inputs I was using, which were not working correctly...

I'm still looking to see if someone else could help me get it working.

You're correct, there's no RPM conversion because there are no common units conversion as you might have with F -> C or PSI -> Bar. RPM is always RPM. :) 'No conversion' seemed like the correct answer.... until I saw the output. LOL This is what I'm using for Can Mapping settings: CAN ID Match CAN ...

FYI - The latest mapping for this ECU is already available in the system presets. Press the cloud update button if you don't see it in the list. I found the presets (thanks), however, it seems as if RPM isn't included in the CAN Mapping. I attempted to add it myself following the tables provided ea...

actually this should be easier, attached is an RCP file you can just load, note you will still need to select the channel within gauges. https://www.dropbox.com/s/vmnu7wu4m7nnjrd/86BRZ%20CAN.rcp?dl=0 Bringing back an old thread... this link is broken, wondering if someone has it or if crimespree wo...

The cold winter is finally over, so I was able to get to the car... Here are some screen shots of what you requested.

Thanks.

I will work on getting the log this evening when I'm near the car.

2002 Chevrolet Corvette Z06, I don't have any other OBDII vehicles that I could test this on.

I'm setup that way with my OBDII configuration.

I've had my setup working without issue, yesterday it suddenly lost data from my two OBDII channels (rpm and tps). I've power cycled the RCPro, unplugged and replugged in the OBDII Legacy plug, confirmed it is plugged into the OBDII port on the car. Using the cable for power, so its working in that ...

I cannot connect directly to the RCP over Bluetooth with the tablet.... however, my SoloStorm app (installed on the tablet) can communicate with the RCP over Bluetooth. It's weird.

Just took the car out to do some testing and the TPS data seems to have resolved itself, I'm getting good readings now.

Smartphone = Samsung Note5 Tablet = LG GPad VK815 With the tablet I have noticed that I cannot access the RCP and SoloStorm at the same time via bluetooth, so I assumed only one connection. And I need to close the RCP app on my phone in order for data to be pulled by SoloStorm on my tablet (followin...

That did it! Awesome.

- Got RPM reading correctly.
- I added TPS, but the number is something like 2,1XX,XXX,XXX. I assume I'm going to have to figure out a conversion for that. Is there a tutorial somewhere I can reference to sort that type of thing out?


Thanks again for the help!

OK, firmware update completed... still not getting any data. Below are settings my settings.... Edit to add: I removed all of the OBDII channels, then added them back in, power cycled the RCP, and restarted the smartphone as well. http://i89.photobucket.com/albums/k234/Mugenlude/Misc/2017-07-01%2016...

Thanks for the update. Depending on the Android device, a couple of things you can do might help resolve the issue. * Restart the bluetooth Service under Android settings (outside the app) - go to Android Settings, bluetooth and turn Bluetooth off, then on again. Did this no change * If that doesn'...

I thought that this issue was resolved (it was working for a couple events), however, the same issue has come about again. I have tried the process you listed above, as well as tried the process that worked for me previously (unplugging the Bluetooth module). I have also tried connecting with my sma...