Search found 17 matches

by EcotecMiata
Sat Mar 03, 2018 8:20 pm
Forum: RaceCapture App Operation and General Q&A
Topic: How To: Raspberry Pi GPIO Buttons for RaceCapture
Replies: 1
Views: 3758

How To: Raspberry Pi GPIO Buttons for RaceCapture

Demo Video: https://www.youtube.com/watch?v=b4YTmlmBw5Q This isn't very complicated, get RaceCapture working in Raspberry Pi First. Go grab yourself the buttons that you will need 2 or 3 buttons: Left, Right and "ESC" though Left and Right are really all you need. ESC just bring your back ...
by EcotecMiata
Sat Mar 03, 2018 2:58 pm
Forum: Hardware and Installation
Topic: Multiple tablets paired to RCP Mk2?
Replies: 3
Views: 6742

brentp wrote:Hi,

You can connect one tablet via the Bluetooth interface (if the BT module is installed) and you can connect a 2nd tablet via the WiFi interface as well, for a total of two.

Hope this helps!
Is it possible to have the mk2 connect via USB to raspberry pi and to Android via Bluetooth?
by EcotecMiata
Tue Feb 13, 2018 11:29 am
Forum: ShiftX2
Topic: ShiftX with /Track
Replies: 7
Views: 11200

Anyone?
by EcotecMiata
Sat Feb 10, 2018 1:59 pm
Forum: ShiftX2
Topic: ShiftX with /Track
Replies: 7
Views: 11200

ShiftX with /Track

I'm assuming this won't work with race capture/track due to lack of LUA?

Paul
by EcotecMiata
Thu Feb 08, 2018 4:28 am
Forum: RaceCapture App Operation and General Q&A
Topic: Raspberry Pi support - enables a hard-wired, dedicated dash
Replies: 127
Views: 845823

Hi Brent, a got it to work, I didn't do anything however. After about 4 or 5 minutes it connected and was solid. Not sure why it takes so long for the Pi to read the Race Capture.
by EcotecMiata
Wed Feb 07, 2018 3:59 pm
Forum: AnalogX
Topic: AnalogX with RaceCapture/Track
Replies: 6
Views: 13140

You can connect AnalogX to RaceCapture/Track, but it will only work with sources that have linear mappings. Example: 0.5v = 0 PSI, 4.5v = 150 PSI, as found on an oil pressure sensor, and other sensors with a straight-line linear mapping, such as wideband AFR sensors. Sensor with a curved mapping (l...
by EcotecMiata
Wed Feb 07, 2018 3:03 pm
Forum: RaceCapture App Operation and General Q&A
Topic: Raspberry Pi support - enables a hard-wired, dedicated dash
Replies: 127
Views: 845823

No Data

I got my PI3 running with the standard 7" screen this morning in about 45 minutes the benefit of 20+ years of Linux experience. However RC app doesn't seem to be getting any data - the setup shows it's connected to USB but when I swipe to the "Raw Channels" screen I get "Waiting ...
by EcotecMiata
Sun Feb 04, 2018 3:44 pm
Forum: AnalogX
Topic: AnalogX with RaceCapture/Track
Replies: 6
Views: 13140

My goal is to replace my current dash 100% with an Android tablet connected to RaceCapture.

I've got a Miata gauge cluster blank panel as a starting point.

Related topic, is "check engine" something that RaceCapture is aware of on CAN or OBD2?
by EcotecMiata
Sun Feb 04, 2018 3:33 pm
Forum: AnalogX
Topic: AnalogX with RaceCapture/Track
Replies: 6
Views: 13140

I was thinking of using this to convert my Miata fuel sender into 5v.

http://www.ironcanyonmotorsports.com/icm-fuel-sender/
by EcotecMiata
Sun Feb 04, 2018 2:58 pm
Forum: AnalogX
Topic: AnalogX with RaceCapture/Track
Replies: 6
Views: 13140

AnalogX with RaceCapture/Track

Am I correct that I can use AnalogX to add analog sensors to my CAN bus that my /Track can then display? I've got a '90 Miata with a 2013 Ecotec engine, the engine is CAN but the car isn't, what I'm hoping to do is add fuel sensor, oil pressure, wideband and maybe one other sensors onto the CAN bus ...
by EcotecMiata
Thu Jan 18, 2018 4:53 pm
Forum: RaceCapture/Track Introductions
Topic: Hello from Toronto
Replies: 5
Views: 8089

Given my Racecapture/Track is installed with the cable facing the front of the car does that mean I need to tweak some of the settings in Accel/Gyro setup such as inverting pitch? What about X, Y, Z acceleration?

Paul
by EcotecMiata
Fri Oct 20, 2017 12:26 am
Forum: RaceCapture/Track Operation
Topic: First use
Replies: 3
Views: 6490

No it seems to have identified sessions but not actually logged the times.
by EcotecMiata
Sun Oct 08, 2017 11:25 am
Forum: RaceCapture/Track Operation
Topic: First use
Replies: 3
Views: 6490

First use

Had my car and race capture on track yesterday for the the first time. The track was detected, and lap timing started up automatically. However, when I got back to the pits to run analysis of my session there were no laps recorded just empty sessions. This was unfortunate because I had the opportuni...
by EcotecMiata
Sat Sep 30, 2017 7:36 pm
Forum: RaceCapture/Track Introductions
Topic: Hello from Toronto
Replies: 5
Views: 8089

brentp wrote:Nice. Proclip mounts are awesome!
Now I need to figure out my Canbus mappings for GMLan Ecotec 2.4.
by EcotecMiata
Sat Sep 30, 2017 6:55 pm
Forum: RaceCapture/Track Introductions
Topic: Hello from Toronto
Replies: 5
Views: 8089

Got it installed, similar to someone else I believe that posted a Miata.

Have a Nexus 7 installed on the dash using a Proclip Mount.