Search found 22 matches

by F1 Dennis
Mon Jul 13, 2020 8:40 pm
Forum: RaceCapture/Pro General Q&A
Topic: Safe to remove SD card while the device is on?
Replies: 1
Views: 3123

Safe to remove SD card while the device is on?

This may be a dumb question, but is it safe to remove the SD car while the device is still on but not recording?
I want to download and check data between sessions but not turn the device off so the GPS signal stays strong.

Thanks,
Dennis
by F1 Dennis
Wed Oct 23, 2019 2:11 am
Forum: Hardware and Installation
Topic: Different carriers cause more or less interference with GPS?
Replies: 1
Views: 6858

Different carriers cause more or less interference with GPS?

Unfortunately my GPS data from my last track day at Auto Club Speedway was extremely poor to unusable. I’m wondering if maybe the GPS system got more interference from the cellular antenna because I switched SIM cards from t-mobile to freedom pop. Do different carriers use bands that may be closer t...
by F1 Dennis
Tue Oct 15, 2019 4:38 pm
Forum: Lua Scripting
Topic: Help, Firmware update caused Lua script to stop working
Replies: 9
Views: 10584

Thank you Brent. I didn't think to check this log before. It was a Lua Script memory error. I trimmed down the Lua by eliminating a few of the less important channels I was recording from there. I also did the same in my CAN 2 mapping. Couldn't hurt to keep everything as lean as possible. Not sure i...
by F1 Dennis
Mon Oct 14, 2019 8:42 pm
Forum: Lua Scripting
Topic: Help, Firmware update caused Lua script to stop working
Replies: 9
Views: 10584

After further testing the issue still persists. Unfortunately it seems very random. Sometimes when I boot up the system it will work fine. Then I'll turn it off for a minute and back on and can line will not work. I noticed now that the (!) error LED will blink red when the problem occurs. I thought...
by F1 Dennis
Mon Jul 29, 2019 5:06 pm
Forum: Lua Scripting
Topic: Help, Firmware update caused Lua script to stop working
Replies: 9
Views: 10584

Yes, as you described. My car's CAN is connected to CAN1 and I'm using Lua Script to parse the feed. (This is the problem CAN) Izze sensors are on CAN2 and using RC's built in CAN mapping. (This works fine even when CAN1 is broken.) Update: I noticed there was another firmware update so updated from...
by F1 Dennis
Fri Jul 19, 2019 7:52 pm
Forum: Lua Scripting
Topic: Help, Firmware update caused Lua script to stop working
Replies: 9
Views: 10584

Update: Unfortunately I still have a bug with this. I thought it was fixed because it works correctly when my MacBook is plugged in via usb, but then won't read the CAN line without it. Race Capture pro mk3. firmware 2.17.0 Mac osx app 1.16.0 iPad and iPhone app 1.15.2 Problem: car's CAN line using ...
by F1 Dennis
Fri Jul 12, 2019 6:52 pm
Forum: Lua Scripting
Topic: Help, Firmware update caused Lua script to stop working
Replies: 9
Views: 10584

Update:
I reinstalled the firmware one more time and it cleared it up. Everything works now.
I guess there may have been some glitch on the first install.

when in doubt reboot, reinstall, etc right?

thanks
by F1 Dennis
Fri Jul 12, 2019 6:11 pm
Forum: Lua Scripting
Topic: Help, Firmware update caused Lua script to stop working
Replies: 9
Views: 10584

Help, Firmware update caused Lua script to stop working

My Lua script for mapping some CAN channels stopped working after I updated my firmware yesterday. I double checked and my CAN bus setting are still switched on. Not sure where to even start with fixing this because it was working fine before the update and then just stopped. Brent, is there anythin...
by F1 Dennis
Thu Jul 11, 2019 3:14 am
Forum: RaceCapture App Operation and General Q&A
Topic: Macbook only connects via usb, not WiFi
Replies: 1
Views: 4360

Macbook only connects via usb, not WiFi

My MacBook will only connect to my race capture Pro MK3 via usb and not WiFi. It can see the RC WiFi and connect but the app won’t connect. It’s been like this since the beginning. WiFi connection Works fine on my iPad and iPhone. Is this because I connected to the race capture device with usb first...
by F1 Dennis
Fri Jul 05, 2019 8:35 pm
Forum: Bug Reporting
Topic: Track detection screen pops up unexpectedly some times
Replies: 7
Views: 8529

Thanks Brent,
Looking forward to it working. I'll post back after the next event.
Will it also not pop up for 24 hours after it auto-dismisses?
by F1 Dennis
Fri Jul 05, 2019 3:58 pm
Forum: Bug Reporting
Topic: Track detection screen pops up unexpectedly some times
Replies: 7
Views: 8529

This happens to me consistently at Willow Springs Raceway, big track.
I see the update is released. Are there any other steps after install to prevent this screen from popping up?

Thanks
by F1 Dennis
Sun May 20, 2018 10:54 pm
Forum: Sensors
Topic: Best method to integrate Izze temp sensors?
Replies: 4
Views: 6280

Oh I think I figured it out. I see the naming convention for the heat map display screen is different from the one used on the preset. I took out the underscores from the presets and it worked. Also the letters for Front and Back and Left and Right are switched. TireTmp_LF1 should be: TireTmpFL1 I c...
by F1 Dennis
Sat May 19, 2018 5:03 pm
Forum: Sensors
Topic: Best method to integrate Izze temp sensors?
Replies: 4
Views: 6280

Thanks Brent! Those presets are great. I was able to switch them on pretty quick thanks to those. I can see the the temp readings in the dashboard list screen, but the tire temp screen isn't showing the data on the tire graphics. I tried clicking on the tire graphics to see if there was a setting to...
by F1 Dennis
Tue May 15, 2018 3:18 am
Forum: Sensors
Topic: Best method to integrate Izze temp sensors?
Replies: 4
Views: 6280

Best method to integrate Izze temp sensors?

For the Izze tire temp sensors, I see there is a page that outlines a lua script to handle the CAN mapping. https://wiki.autosportlabs.com/Izze_Racing_Temperature_Sensors The script all makes sense, but I have seen a few other posts from Bret mentioning that using the built in CAN mapping is better ...
by F1 Dennis
Sun Oct 29, 2017 10:44 pm
Forum: RaceCapture App Operation and General Q&A
Topic: How to read SD card data in app analysis???
Replies: 2
Views: 3877

I found the answer to this in an older post. https://forum.autosportlabs.com/viewtopic.php?t=5349&sid=96a9fe52a241e1a7734c72f35bc1b5d9 Now that I see the SD logging requires you to manually remove the card to get the data, I'd suggest wireless reading capability in a future update. It'll be help...