Search found 21 matches

by Takabayashi
Thu Nov 21, 2019 6:58 am
Forum: Hardware and Installation
Topic: Podium Hardware CAN Warning lamp turn on
Replies: 6
Views: 7851

Hello brentp-san,

Thank you for your support.

We will check it.
Then i will tell you result.
by Takabayashi
Mon Nov 18, 2019 6:55 am
Forum: Hardware and Installation
Topic: Podium Hardware CAN Warning lamp turn on
Replies: 6
Views: 7851

Hello brentp-san,

i changed baud rate to 1MB.
But still orange ....

Therefore i prepare two of podium what same setting .
But we did not have positive result.
i guess hardware had issue.

Can i ship back to your office?
And check and replace then ship back to us?

i attached picture.
by Takabayashi
Thu Oct 24, 2019 6:23 am
Forum: Hardware and Installation
Topic: Podium Hardware CAN Warning lamp turn on
Replies: 6
Views: 7851

Hello brentp-san,

Thank you for your strongly support.

i will change baud late to 1MB.(maybe current 500)
by Takabayashi
Sat Oct 12, 2019 2:22 pm
Forum: Hardware and Installation
Topic: Podium Hardware CAN Warning lamp turn on
Replies: 6
Views: 7851

Hello , gentlly reminder. Even though i introduced podium to shop. But this one did not correctly work. We use podium with AIM solo DL. If use this one , GPS had 3min delay. Then CAN signal value was not correct. Therefore i tried to change to my podium what it had good result . CAN red warning lamp...
by Takabayashi
Sun Sep 29, 2019 10:53 am
Forum: Hardware and Installation
Topic: Podium Hardware CAN Warning lamp turn on
Replies: 6
Views: 7851

Podium Hardware CAN Warning lamp turn on

Hello , i set up Podium what my friend get. Then i try to use it. Unfortunatery it could not correctly work. i saw everytime CAN red lamp turn on. So, i try to install latest farmware . i install all. But could not resolve. Is it behavior from hardwear issue? Please resolve this . We could not use it.
by Takabayashi
Thu Jun 06, 2019 8:28 am
Forum: CAN mapping discussion
Topic: Directry CAN mapping for Podium
Replies: 12
Views: 15106

In this case , could not see signal.

But i think mapping will simuler before case.
by Takabayashi
Thu Jun 06, 2019 8:25 am
Forum: CAN mapping discussion
Topic: Directry CAN mapping for Podium
Replies: 12
Views: 15106

Hello Ferg-san,

Thank you for quickly reply.

Actually , i try to other vehicle.
i attached 2 mapping. One was done, other is not....

i think this case can ignor little endian and big endian.

In this case i could see signal.
by Takabayashi
Tue Jun 04, 2019 1:43 am
Forum: CAN mapping discussion
Topic: Directry CAN mapping for Podium
Replies: 12
Views: 15106

Hello,

i try to input some value.
i had negative result.
Probably i understood RC mapping rule for bit mode.

One thing , regarding your advice about below.

>Case A: Offset 2, Length 1

i think Offset is 6.
Which is correct?
by Takabayashi
Wed May 22, 2019 8:21 am
Forum: CAN mapping discussion
Topic: Directry CAN mapping for Podium
Replies: 12
Views: 15106

Hello ,

Of course i tried to along this document.
But i did not get positive result.

Could you tell me more detail.

If check the Bit Mode , how to input Offset and Length in A and B case.

( For example , A case Offset= ? Length=1 .

B case Offset=? Length=12 . )
by Takabayashi
Thu May 16, 2019 5:31 am
Forum: CAN mapping discussion
Topic: Directry CAN mapping for Podium
Replies: 12
Views: 15106

CAN mapping except 1 or 2 byte

Hello Brentp-san,

i could directly see CAN mapping data for 1 or 2 length(1(8bit) or 2(16bit) byte).

i want to see except 1 or 2 length.
For example 1 bit type and 12 bit type.

You can see attached file.

Could you tell me how to set them?
by Takabayashi
Tue Apr 30, 2019 4:59 am
Forum: CAN mapping discussion
Topic: Directry CAN mapping for Podium
Replies: 12
Views: 15106

Hello brentp ,

Thank you for your advice.

In this case , Do i need add some source to Lua?

If yes , could you tell me how to add source ?
by Takabayashi
Sun Apr 21, 2019 1:38 pm
Forum: RaceCapture/Pro General Q&A
Topic: How to use Podium for VBOX?
Replies: 0
Views: 97766

How to use Podium for VBOX?

Hello,

i usually use podium for AIM solo/solo2.
i try to use VBOX.
Thou, i got connector & pin.
Could you tell me how to use Podium for VBOX?
by Takabayashi
Tue Apr 16, 2019 1:02 pm
Forum: CAN mapping discussion
Topic: Directry CAN mapping for Podium
Replies: 12
Views: 15106

Directry CAN mapping for Podium

i am using Podium with AIM SOLO & SOLO2.
Unfortunatery , i can see only limited CAN signal along SmartyCom Stream.
i want to see other signal that CAN mapping.
If possible , could you tell me how to setting (hard & soft)?
by Takabayashi
Tue Apr 16, 2019 12:37 pm
Forum: Feature Requests
Topic: Telemetry For 5G system
Replies: 1
Views: 4531

Telemetry For 5G system

Next year some country will bigin 5G network.
Thou , we can use this network.
Please update some system for this changing.
Especially , i want to request what extend podium system.
by Takabayashi
Thu Jan 10, 2019 11:13 am
Forum: RaceCapture App Bug Reporting / Feature Requests
Topic: Windows 1.11.0 App crashing
Replies: 8
Views: 10661

Analysis could not see on RaceCapture APP for Win7

Hi,

i had simular situation.

U can see above title.