Isn't the whole idea of a wiki that the users can update the pages to fix the typo's and such. BTW, the page with the bad info is:
https://wiki.autosportlabs.com/Hondata_KPro4
Search found 36 matches
- Thu Apr 02, 2020 11:04 pm
- Forum: CAN mapping discussion
- Topic: Honda CAN Integration
- Replies: 2
- Views: 6669
- Sat Dec 21, 2019 12:22 am
- Forum: Sensors
- Topic: Recommended way to measure 20A current with race capture?
- Replies: 2
- Views: 7253
I have used a sensor like this one, to produce a 0-5V signal that can be calibrated:
https://www.digikey.com/product-detail/ ... ND/2500500
Connect this to an analog input and log or display the current consumption.
https://www.digikey.com/product-detail/ ... ND/2500500
Connect this to an analog input and log or display the current consumption.
- Sun Oct 06, 2019 5:34 pm
- Forum: Lua Scripting
- Topic: Scaling for CAN Tx messages?
- Replies: 4
- Views: 7617
Re: Scaling is 1:1 dec:phys
Or use a 16 bit value for speed, instead of a single byte.GTIspirit wrote: If my car was capable of more than 158.36mph then I'd have to chose a different scaling factor.....
- Thu Sep 26, 2019 8:07 pm
- Forum: AnalogX
- Topic: Canbus using 2 AnalogX's
- Replies: 3
- Views: 11075
- Thu Sep 26, 2019 4:56 pm
- Forum: AnalogX
- Topic: Canbus using 2 AnalogX's
- Replies: 3
- Views: 11075
- Thu Sep 05, 2019 6:50 pm
- Forum: ShiftX2
- Topic: ShiftX2 Only half the lights work
- Replies: 1
- Views: 5614
It looks to me like because you are using stepped style, you set the number of LEDs in the sxSetLinearThresh to 0 for each threshold, you probably only get one (or two because centered) light per threshold. I would first change the number of LEDs per threshold to something non-zero. You can define u...
- Mon Aug 26, 2019 11:49 pm
- Forum: CAN mapping discussion
- Topic: Honda K20 (in Ariel Atom) with Hondata Flashpro
- Replies: 4
- Views: 8104
It's not clear to me that the FlashPro sends the same data as the KPro produces from Hondata boards. The KPro and S300 are add-in boards, with their own CAN bus output (at least in the case of the S300). But before giving up on this, I would load the KPro Preset into RCP Setup/CAN Mapping, change th...
- Sun Aug 25, 2019 6:35 pm
- Forum: RaceCapture/Pro General Q&A
- Topic: Race Capture Pro Mk3 will not connect to Race Capture App
- Replies: 6
- Views: 8234
- Sun Aug 25, 2019 6:32 pm
- Forum: CAN mapping discussion
- Topic: Honda K20 (in Ariel Atom) with Hondata Flashpro
- Replies: 4
- Views: 8104
Is your HonData configured to send CAN data? You should verify that the correct CAN bus speed (baud rate) is set. I suspect the HonData is 500k baud, but am not certain. Perhaps you can find someone knowledgeable with the CAN bus to help you. I would connect one of my CAN inspection tools (or write ...
- Tue Jun 25, 2019 3:58 pm
- Forum: Hardware and Installation
- Topic: Installing RCP MK III into an Open Cockpit Car
- Replies: 14
- Views: 27184
- Tue Jun 04, 2019 3:41 pm
- Forum: CAN mapping discussion
- Topic: Directry CAN mapping for Podium
- Replies: 12
- Views: 17061
- Fri May 24, 2019 3:42 pm
- Forum: CAN mapping discussion
- Topic: 8th Gen Honda Civic (06-11) CAN PIDs
- Replies: 1
- Views: 3232
Based on what some other brands are able to do, it looks like there could be some useful data available. It's a bit of a job to reverse engineer the CAN bus but it is possible. Looking around, I think the CAN bus might be 250kbit/sec, and the Honda Civic might be using the following CAN IDs: 1684 (0...
- Wed May 22, 2019 3:36 pm
- Forum: CAN mapping discussion
- Topic: Directry CAN mapping for Podium
- Replies: 12
- Views: 17061
- Tue May 07, 2019 5:39 am
- Forum: Lua Scripting
- Topic: Re-scale/ID CAN data to drive gauge cluster
- Replies: 5
- Views: 9111
- Tue May 07, 2019 12:40 am
- Forum: Lua Scripting
- Topic: Re-scale/ID CAN data to drive gauge cluster
- Replies: 5
- Views: 9111
I think you want to use getChannel() as defined here in the API:
https://wiki.autosportlabs.com/RaceCapt ... r_name_.29
https://wiki.autosportlabs.com/RaceCapt ... r_name_.29