Autosport Labs

Here is the tail end of the log after it stops: Going to try and upgrade everything the latest and greatest now and then see if the pi works any better, before I take it out of the dash and put the tablet in place for the next race. [INFO ] [TelemetryManager] starting connection [INFO ] [TelemetryCo...

Thanks Brent. I was planning to upgrade all the software and try this weekend anyways as my phone just asked to upgrade to 1.14.6 so I was assuming all the other platforms were too. I'll put it back together tomorrow before I upgrade and get the actual messages. When it stops working, the race captu...

Been driving back and forth to work using my iPhone connected over wifi. Never got the bluetooth to work, but wifi connects fine. Only twice in the week has it disconnected and required me to reboot everything to get it rolling again. On my kitchen table and during race weekend I never got it to sta...

Just running at the kitchen table for now. The Pi is still having problems. I switched to a "Y" USB cable so I could provide more power to the RaceCapture but no change. I've configured it's WiFi (I couldn't get the Bluetooth working for some reason), and set up my iPhone to connect as the...

It never worked well all weekend :( I have re-built the pi a couple times and tried a different pi as well. So far no luck getting to consistent connections. Things work well for a while, then the gauges freeze and the display changes from RaceCapture/Track MK2 2.13.5 to Searching /dev/ttyACM0 The o...

I've not been able to reproduce in the pits, it is merrily staying connected and showing the gauges on Podium. Lots of garbage data collected today, so I would REALLY like to get this sorted, because as it is, this isn't working. I assume it is part of my set up, but i could use some help figuring o...

I'm running a raceCapture/Track (v2.13.5) and Raspberry Pi dash (v1.13.1). I have a phone in the car providing wifi, and the raceCapture is connected via USB to the dash. When it stop working, the dash says it is looking for the device. I have twice pulled out the USB connecter and re-plugged it in,...

Running in our first race next weekend. I think everything critical is set up ready to go. Two questions for you. On the Event page, the Avatar is the default helmet. I've added an avatar and profile image to the account, but neither seems to appear. I don't have video in the car yet, but I would li...

I second the ease of the Pi. I now have 3 running. 1 on the bench, one now installed and ready to go, and 1 that I need to put into the other car before it's next race in March.

Water Temp ok, positive I have the right byte, but not a 100% on the conversion. Going to try a race next week and see how it lines up with the gauge on the dash before we call it good. I didn't figure out any other signals this weekend as I spent my whole time getting the system installed in the c...

Thanks for the reply, reading through the mustang write up now. I debugged what I have using a python script I found on GitHub and an Arduino with the CANBus shield that I coded to really just be a bus sniffer. It just showed the last message for a given CANBus id in a sorted list, so that while we ...

New user, switching over from a different data acq system. We have a 2 car lemons team and I'm looking for a way to tag which car and which driver data was collected with. Setting up one of the cars for the next Lucky Dog race (in two weeks) and my goal for that race is to get the raceCapture/Track ...

Don't know Left in message 573 is Byte 1 and bytes 6 and 7. 6 and 7 look like a 2's comp 16 bit little endian number, but I cannot figure out what the sensor is measuring. Value is high when the car on but the motor isn't running (2300) then goes low when the car starts (150) then creeps up to a sta...

Water Temp Not sure yet if this is right. Next time I hang out with the car I'll do some more testing. I ran a long test letting the car come up to temp and logging what came out of the ECU. Byte 8 of message 573 seems to be the right kind of graph. Based on the 370Z I was expecting it to be offset...

Message 574

This one is always 0 for all the bytes. No idea what it should be, but from the ECU I'm just ignoring this one.