Autosport Labs

hello this is a test

Hi, sorry for the late reply. Here's a link to a DBC file you should be able to use to import into your AIM system:

https://wiki.autosportlabs.com/TireX#CAN_protocol_files

The tach output is a 0-5v square wave signal. You can contact Holley to see if their tach will accept this kind of signal. Otherwise there are a few other options, such as possibly connecting the tach to one of the coil pack drive wires.

Let us know what you find out!

Hi, right now the system requires a fairly recent version of MacOS. try the latest 2.16.0 app we dropped today and see if that works.

There might be a way to make it more compatible with older OS's, but we're not sure if that will be possible.

Hi, are you saying there are two different CAN bus networks in the car, and you want to access both simultaneously? I ask because regular OBDII connectors only have one CAN bus connection. Often cars have multiple CAN bus networks - one on the OBDII port, and other internal networks that can be tapp...

Hi, basic 'alive' test - does the system otherwise control ignition advance, when you observe it with a timing light and while you vary RPM?

Hey! yes, we're still around, largely moved on to motorsport data and real-time telemetry!

Are you still using your megajolt?

Yes, the aux input should work for you in this case!

Try checking if the VR sensor is wired backwards - the polarity is definitely important.

Hi, thanks for the note. We are working on a number of analysis features an improvements, so this is something we definitely care about. For the stepped time gap, I'm assuming you mean the jagged lines you see in the trace? Would we be able to get a copy of your data log to check it out and reproduc...

Thanks! Did you save this as a CAN preset in the CAN mapping preset? perhaps we can take a look at it.

Hi, sorry for the late reply!

All you need is a common ground, it does not need to be powered by the same source.

For PlatformIO, what board support is needed? We already have support for Arduino and CircuitPython.

Cool project! Well done!

As usual, we strongly discourage using Megajolt in an airplane, as it is not rated for such use.

-Brent

You could use Lua scripting with RaceCapture to create a gateway, but since you already have a data system, you might consider the ESP32-CAN-X2 with some Arduino or circuit python to join them together. The issue is, you might need a 3rd CAN bus to truly keep them isolated. You might want to just id...

Sorry about that! here's a new link: https://discord.gg/kvdcxb5fUj