Search found 8 matches
- Tue Mar 01, 2022 4:57 pm
- Forum: Hardware and Installation
- Topic: ODB replacement cable
- Replies: 10
- Views: 5685
Re: ODB replacement cable
I need to know if ALL new cables are using Sig Gnd, if so are there is there a good reasons for the change from the original cable. If there was not an engineering reason for the change I will put a new RJ45 on the old cable and return the new cable. If there was a good reason for the change I will ...
- Thu Feb 17, 2022 8:40 pm
- Forum: Hardware and Installation
- Topic: ODB replacement cable
- Replies: 10
- Views: 5685
Re: ODB replacement cable
I would have thought that for this application you would want to use signal ground. While they are at the same nominal potential signal ground should provide a less noisy signal for data. My car may be deficient in not providing a signal ground, but I don't understand why you would use chassis groun...
- Thu Feb 17, 2022 5:11 pm
- Forum: Hardware and Installation
- Topic: ODB replacement cable
- Replies: 10
- Views: 5685
- Thu Feb 17, 2022 4:51 am
- Forum: Hardware and Installation
- Topic: ODB replacement cable
- Replies: 10
- Views: 5685
Re: ODB replacement cable
2014 Scion FRS
I will check the port tomorrow;
I will check the port tomorrow;
- Tue Feb 15, 2022 5:22 pm
- Forum: Hardware and Installation
- Topic: ODB replacement cable
- Replies: 10
- Views: 5685
Re: ODB replacement cable
BUMP.
Is there anyone who does customer service?
Is there anyone who does customer service?
- Sat Feb 12, 2022 6:49 pm
- Forum: Hardware and Installation
- Topic: ODB replacement cable
- Replies: 10
- Views: 5685
Re: ODB replacement cable
Yes the old cable still works. I used a short RJ45 extension and taped it to the old cable to overcome to broken catch. I now have a working, if inelegant system.
The system and cable were both purchased from Petrel Solostorm.
The system and cable were both purchased from Petrel Solostorm.
- Fri Feb 11, 2022 4:40 pm
- Forum: Hardware and Installation
- Topic: ODB replacement cable
- Replies: 10
- Views: 5685
ODB replacement cable
I recently bought a replacement cable for my race capture. The original had a broken catch on the RJ45 plug that was causing data loss. When I installed the new cable the RC unit would not power up. I have discovered that ground the old cable was wired to pin 4 (chassis) on the ODB plug, but the new...
- Tue Oct 06, 2020 9:41 pm
- Forum: RaceCapture/Track Bug Reporting / Feature Requests
- Topic: Intermittent data errors
- Replies: 1
- Views: 5894
Intermittent data errors
I have a track/mk2 using Solostorm 2 as the logger in a Toyota FRS for Autocross. At the last event I started to get intermittent errors in the data for Steering, brake pressure, TPS, and Lat G. The errors last only for a few (0.1 sec) samples but are very large up to 32K. The Solostorm analysis too...