RegisterSearchFAQMemberlistUsergroupsLog in
Search found 181 matches
Author Message
PostForum: ShiftX2   Posted: Wed Oct 09, 2019 11:05 pm   Subject: Bug in sxCfgLinearGraph scaling?

It seems like there is a bug in the sxCfgLinearGraph scaling. It only seems to work as expected with zero to something scaling. If I want to start scaling at say 5000rpm, it doesn't work as expected ...
PostForum: Lua Scripting   Posted: Mon Oct 07, 2019 9:59 pm   Subject: Re: Scaling is 1:1 dec:phys

If my car was capable of more than 158.36mph then I'd have to chose a different scaling factor.....

Or use a 16 bit value for speed, instead of a single byte.

Yes! That is exactly what I sugge ...
PostForum: RaceCapture/Track Operation   Posted: Sat Oct 05, 2019 10:42 pm   Subject: Manual logging start with RC Track?

Is it possible to manually start logging with the RC Track?

It looks like it will only record the session when in dashboard mode.
[url=https://wiki.autosportlabs.com/RaceCapture-Track_MK2#Analysis ...
PostForum: Lua Scripting   Posted: Sat Oct 05, 2019 10:31 pm   Subject: Scaling is 1:1 dec:phys

I did a little testing, and it appears the scaling is 1:1 decimal:physical. The integer value of the signal is what is sent on CAN.

With a little help from this post:
setTickRate(10) --Ti ...
PostForum: RaceCapture/Track Operation   Posted: Sun Sep 29, 2019 4:54 pm   Subject: CAN Baud Rate setting for both channels, or individually?

Well, not sure why the baud rate selection for both channels didn't show up yesterday. Now they both show up, which answers the question.

Yes, they seem to be set individually.
PostForum: Lua Scripting   Posted: Sat Sep 28, 2019 4:24 pm   Subject: Scaling for CAN Tx messages?

What is the scaling on Lua Script CAN Tx messages?

setTickRate(10)
function onTick()
local speed = getGpsSpeed()
--format the speed in a CAN message. Speed is in the first byte
local msg ...
PostForum: RaceCapture/Track Operation   Posted: Sat Sep 28, 2019 4:04 pm   Subject: IMU / Accelerometer orientation?

What is the default IMU / Accelerometer orientation?

So if the RC Track Mk2 is mounted in vehicle with CAN / OBDII port facing foward (so the logo lettering is "normal")
https://wiki.aut ...
PostForum: RaceCapture/Track Operation   Posted: Sat Sep 28, 2019 3:47 pm   Subject: CAN Baud Rate setting for both channels, or individually?

Finally getting around to configuring my RC/Track Mk2 now that my old car is running with new EFI.

I see one setting for Baud Rate under the CAN Bus setting. That setting is besides Channel 1. Th ...
PostForum: RaceCapture/Track Operation   Posted: Sun Jan 06, 2019 5:50 pm   Subject: RJ45 connector wiring convention for RaceCapture/Track?

Yes, but that page only lists the wire colors, not the pin numbers. I suppose it assumes there is a coloring convention when inserting wires into an RJ45 connector.

The numbering in the picture ab ...
PostForum: RaceCapture/Track Operation   Posted: Fri Dec 28, 2018 4:56 pm   Subject: RJ45 connector wiring convention for RaceCapture/Track?

What is the RJ45 connector wiring convention for the RaceCapture/Track MK2? Is this convention standardized across all Autosport Labs devices?

So it would be like this?

https://wiki.autosportla ...
PostForum: RaceCapture/Track Bug Reporting / Feature Requests   Posted: Fri Jul 13, 2018 7:24 pm   Subject: RC/Track - Garmin Virb Ultra 30

Yes, here’s a link to the Garmin VIRB API documentation, not just VIRB Ultra 30, but all Garmin Virb cameras
https://developer.garmin.com/downloads/virb/Camera_Network_Services_API_v0.5.pdf

Until ...
PostForum: RaceCapture/Pro General Q&A   Posted: Sat Jan 27, 2018 2:14 pm   Subject: Possible to log CAN data on RCP MKI?

Components aren't mounted as straight as I'd like, but they should be functional..... I learned a lot from soldering the first board. That's why I ordered three PCB, because ordering 3 from OSHpark ...
PostForum: RaceCapture/Pro General Q&A   Posted: Tue Jan 23, 2018 12:34 am   Subject: C1 correct?

Is C1 the correct form factor? Looks a bit small for the pads.... Can I solder the one end to the circle? Or does the circle not connect to the pad just to the right? Build list calls for "SM ...
PostForum: RaceCapture App Operation and General Q&A   Posted: Tue Aug 22, 2017 10:34 pm   Subject: RaceCapture app, how to browse to network drive?

Ah yes, I was cheating by browsing directly to the drive from within Windows Explorer since for some reason Windows network drive mapping wasn't initially working with my NAS.
PostForum: RaceCapture App Operation and General Q&A   Posted: Tue Aug 22, 2017 10:32 pm   Subject: How to view multiple runs in RaceCapture app?

Ahh, thanks! I knew it was something easy which I was missing.

It also looks like after one channel is selected from one session, simply double clicking on the other sessions adds the same channel ...
 
Page 1 of 13 Goto page 1, 2, 3 ... 11, 12, 13  Next
All times are GMT