RegisterSearchFAQMemberlistUsergroupsLog in
Search found 5 matches
Author Message
PostForum: CAN mapping discussion   Posted: Thu Dec 21, 2017 1:58 am   Subject: Not able to pull any CAN info

Good news! Got it up and running. I ended up splicing into the CAN wires going into the dash as I wasn't able to get any info from the steering angle sensor plug. I did some research online and found ...
PostForum: CAN mapping discussion   Posted: Tue Dec 19, 2017 10:38 pm   Subject: Not able to pull any CAN info

I'll give that a shot!

Before, we tried pulling from the two twisted wires under the dash as shown in the installation instructions. When that didn't work we tried pulling from the connector under ...
PostForum: CAN mapping discussion   Posted: Mon Dec 18, 2017 11:48 pm   Subject: Not able to pull any CAN info

Hi Brent, the Baud rate is set at 500k. But the CAN LED doesn't come on. The only LED that's on from that side is the one blinking for GPS.


Thanks
PostForum: CAN mapping discussion   Posted: Mon Dec 18, 2017 6:15 am   Subject: Not able to pull any CAN info

Bump
PostForum: CAN mapping discussion   Posted: Fri Dec 15, 2017 6:06 pm   Subject: Not able to pull any CAN info

Hi all, first of many posts here. I'm having a bit of an issue setting up the Racecapture pro3. I have an E46 M3, so I downloaded the E46 config as a start to get the ball rolling. I can't get anythin ...
 
Page 1 of 1
All times are GMT