RegisterSearchFAQMemberlistUsergroupsLog in
Search found 33 matches
Author Message
PostForum: Operation   Posted: Mon Feb 16, 2009 4:56 pm   Subject: TPS wont caliberate?

PLAN C NOT RQUIRED!!! so after doing the tests discussed earlier i thought to my self i'l try it one more time. so plugged in the laptop and first attempt it caliberated! so problem solved?? its worki ...
PostForum: Operation   Posted: Mon Feb 16, 2009 2:44 pm   Subject: TPS wont caliberate?

dean, if i have to i will... but i dont want to! anyway good news! now i have the correct pin 11 i have voltage at pin 11 and it increases as the throttle opens to about 4.1v. good news i'm guessing??
PostForum: Operation   Posted: Sun Feb 15, 2009 9:23 pm   Subject: TPS wont caliberate?

yeah i'l test it tomorrow, then on to plan C!
PostForum: Operation   Posted: Sun Feb 15, 2009 5:54 pm   Subject: TPS wont caliberate?

ok so i had the wrong pin 11, counted 3 down instead of 3 up! but i do have conectivity between R3 north and R4 north as well as the thro hole to pin 11. i'l check for voltage again tomorrow to the co ...
PostForum: Operation   Posted: Sun Feb 15, 2009 11:53 am   Subject: TPS wont caliberate?

just checked and there is NO conectivity between the two. gettin somewhere now!
PostForum: Operation   Posted: Sun Feb 15, 2009 11:28 am   Subject: TPS wont caliberate?

ok then as suggested i get 5v accross R3 no problem, but at pin-11 i get nothing (220/230mV) so any ideas??? next test? thanks guys
PostForum: Operation   Posted: Sat Feb 14, 2009 4:29 pm   Subject: TPS wont caliberate?

email sent to first adress thanks
PostForum: Operation   Posted: Sat Feb 14, 2009 3:17 pm   Subject: TPS wont caliberate?

hi having trouble getting my images on here, there too big and i cant resize them, il keep working on it
PostForum: Operation   Posted: Sat Feb 14, 2009 2:21 pm   Subject: TPS wont caliberate?

thanks for that martin, i'l get back to you on a bit later about that.

as for the tps..... i have 5 volts coming from my mj unit, and i have 5v going back when bridged. however when i bridge it ba ...
PostForum: Operation   Posted: Fri Feb 13, 2009 6:18 pm   Subject: TPS wont caliberate?

il give it a go tommorrow brent, just out of curiosity, my tps guage in the software reads 100% all the time is this usual?
PostForum: Operation   Posted: Fri Feb 13, 2009 5:59 pm   Subject: TPS wont caliberate?

sorry its v4 running tps. not to sure on the rest as i bought it second hand but unused, how do i find out?
PostForum: Operation   Posted: Fri Feb 13, 2009 5:26 pm   Subject: TPS wont caliberate?

so after a lot of messing around, i found that my mj unit had not had the tps part soldered up correctly, this has now been rectified but guess what? tps still will not caliberate! can anybody think o ...
PostForum: Assembly   Posted: Wed Feb 04, 2009 6:19 pm   Subject: should these be soldered?

the unit was bought secondhand but unsed, ive now soldered these so we'l see if it lets me calberate the tps tommorrow!
thanks
PostForum: Operation   Posted: Wed Feb 04, 2009 3:09 pm   Subject: TPS wont caliberate?

ok every thing seems to be as should be so there must be a problem with the mj unit, il report back what i find
PostForum: Assembly   Posted: Wed Feb 04, 2009 3:04 pm   Subject: should these be soldered?

ok so im having problems setting up my tps, checked every thing over and the problem points to the mj unit. so i removed the board and found that the series of resistors in the tps area are only solde ...
 
Page 1 of 3 Goto page 1, 2, 3  Next
All times are GMT