RegisterSearchFAQMemberlistUsergroupsLog in
Search found 6209 matches
Author Message
PostForum: RaceCapture App Operation and General Q&A   Posted: Wed Jul 17, 2019 10:19 pm   Subject: Macbook only connects via usb, not WiFi

Hi,

Desktop / laptop OSX and Windows versions of the app, only USB is supported.
PostForum: Bug Reporting   Posted: Fri Jul 12, 2019 7:39 pm   Subject: Help, Firmware update caused Lua script to stop working

Hi Dennis,

Glad you got things working. Thanks for your patience and persistence!
PostForum: CAN mapping discussion   Posted: Thu Jul 11, 2019 3:29 pm   Subject: Subaru SSM3 via Can

Nice progress. Do you have this in github? or is the script you posted here the latest?

Is the hardware basically an arduino with a CAN shield?
PostForum: Telemetry   Posted: Sun Jul 07, 2019 8:40 pm   Subject: Pins soldered together RCP2??

Hi,

For the RaceCapture log you have enabled "debug" mode. Set the log level to "Info" and you won't see the CAN messages.

The RaceCapture application log is not useful fo ...
PostForum: Lua Scripting   Posted: Fri Jul 05, 2019 9:54 pm   Subject: Injector PWM signal to Fuel Consumption

Hi,

Thanks for the update.

The impedance of the timer input is very high - in the megaohm range - so I believe your problem is elsewhere in the system. Also, connecting a timer input to the d ...
PostForum: Bug Reporting   Posted: Fri Jul 05, 2019 4:04 pm   Subject: Track detection screen pops up unexpectedly some times

Once it is dismissed manually it should not pop up again for about 24 hours.

Also, with the latest app, the popup will auto-dismiss after a number of seconds.

Let us know if you don't see the ...
PostForum: Telemetry   Posted: Mon Jul 01, 2019 3:49 pm   Subject: Pins soldered together RCP2??

In your log file I don't see any messages about attempting to communicate with the cellular module.

Try ensuring that the cellular module is turned on under Setup / Wireless, then, write, then pow ...
PostForum: Telemetry   Posted: Fri Jun 28, 2019 10:28 pm   Subject: Support for enhanced cellular telemetry buffering

Important news: we are readying support for enhanced telemetry buffering, which will allow the system to deal with drop-outs while on track.

This will let the system fill in the gaps if the system ...
PostForum: Q&A   Posted: Fri Jun 28, 2019 10:22 pm   Subject: Undriveable under load

Glad you got it figured out.

If they're doing a comprehensive tune, then that sounds pretty correct.
PostForum: Installation   Posted: Fri Jun 28, 2019 10:20 pm   Subject: Coil Pack Tach Support ?

We found that the resistors across the diodes provide a bit of a leakage current which seems to make certain older tachometers happy.
PostForum: RaceCapture/Track Bug Reporting / Feature Requests   Posted: Fri Jun 28, 2019 10:19 pm   Subject: RaceCapture/Track bricked after firmware update

Also, if you do not see the flashing LED, there's a way to force bootloader mode. You will need to open the case and bridge the Action button pads when powering up. This is the equivalent of holding t ...
PostForum: RaceCapture/Track Bug Reporting / Feature Requests   Posted: Fri Jun 28, 2019 10:15 pm   Subject: Flickering TPS and RPM data/gauges for E46 Setup

Glad you got it figured out. Yes, 25Hz is a better default sample rate.
PostForum: RaceCapture/Track Bug Reporting / Feature Requests   Posted: Fri Jun 28, 2019 10:14 pm   Subject: RaceCapture/Track bricked after firmware update

Sometimes we see a failed firmware upgrade because a customer accidentally flashed the firmware from a different product.

What happens in this case is the firmware will fail to run, and then the u ...
PostForum: Telemetry   Posted: Fri Jun 28, 2019 10:09 pm   Subject: RealTime Telemetry Module Question

Hi, it's not locked to a specific account; it's based on the Podium device ID. See the full instructions here:
https://wiki.autosportlabs.com/RaceCapture_real_time_telemetry

Be sure to update the ...
PostForum: Telemetry   Posted: Fri Jun 28, 2019 9:20 pm   Subject: Pins soldered together RCP2??

Those should not be soldered together. Can you try unsoldering it?

Is this the first time trying to use it? What cell carrier are you attempting to use?
 
Page 1 of 414 Goto page 1, 2, 3 ... 412, 413, 414  Next
All times are GMT