RegisterSearchFAQMemberlistUsergroupsLog in
Search found 280 matches
Author Message
PostForum: Installation   Posted: Sun Jun 22, 2014 11:45 am   Subject: TESTING Megajolt

A smaller gap would be better, 0.75mm with a maximum runout of 0.25mm is a good target.
PostForum: Installation   Posted: Sun Jun 15, 2014 5:39 pm   Subject: TESTING Megajolt

If you are seeing erratic RPM then my bet is that your trigger wheel is not properly centered. Looking at your pictures it looks like your wheel is not mounted using a centralising hole so you will h ...
PostForum: Installation   Posted: Thu May 08, 2014 6:35 am   Subject: Megajolt Spark Plug Conversion


You should have got some instructions with the adaptors which explain how you fit them but if not let us know and we can send you another copy of them.

The terminal fits in the rubber with a ...
PostForum: General Discussion   Posted: Fri Apr 18, 2014 10:23 am   Subject: Shipping Charges.

Since you're in the UK you may find it cheaper and simpler to order from us at as we carry the stock and being based in the UK shipping should be a lot cheaper and there is no impor ...
PostForum: Operation   Posted: Thu Apr 10, 2014 9:46 am   Subject: Changed to new laptop setting up issues.

That is strange. I wonder if your copy of Windows or Internet Explorer is corrupting the download in some way.

Would it be possible for you to try the download on a different web browser - say Chr ...
PostForum: Operation   Posted: Tue Apr 08, 2014 10:02 pm   Subject: Changed to new laptop setting up issues.

I don't believe that the 4.0.0 configurator software will work with the 4.0.2 firmware that I suspect that you have on your ECU. The 4.0.2 configurator download seems to work OK at present from the w ...
PostForum: Sensors   Posted: Tue Apr 01, 2014 1:15 pm   Subject: Driver Temp

The temperature sensing pills are single use (for fairly obvious reasons) and both they and the receiver are expensive pieces of kit. The usual way to do temperature monitoring of this kind without t ...
PostForum: Assembly   Posted: Thu Feb 13, 2014 10:45 pm   Subject: Tps to map conversion

No, you cannot add an on-board MAP sensor to your ECU. You can however run an external MAP sensor in place of the TPS.
PostForum: Ignition Map Library   Posted: Sat Feb 01, 2014 9:31 am   Subject: MAP for a RV8

Hi Mark,

I've only just seen this mesage. There are Rover V8 maps on the CD you receive with the package. Please get in touch if you have any problems.
PostForum: Installation   Posted: Sat Feb 01, 2014 9:26 am   Subject: retain original ignition as a fallback ?

We've supplied Megajolt systems to many people doing long duration, unsupported expeditions. For their first event they typically want a spares package plus they leave the original ignition set up so ...
PostForum: Installation   Posted: Sat Feb 01, 2014 9:16 am   Subject: Values for fuses recommendation

The Megajolt is low current so should be on a separate low-rated fuse, 5Amp is overkill for that really. The EDIS and coils are the bits that needs the higher current fuses. In general people connec ...
PostForum: Installation   Posted: Sat Feb 01, 2014 9:12 am   Subject: Multiple Tach Signal outputs

It will probably work but I'd recommend keeping things separated if possible. Why not feed the Innovate from the Megajolt or EDIS tach output?
PostForum: Installation   Posted: Wed Jul 24, 2013 10:08 pm   Subject: Rover V8 14 cux Install Help!!!!

You will need a tacho adaptor to feed the 14CUX from the coils, otherwise you'll have spark but no fuel!
PostForum: Q&A   Posted: Sun Jun 30, 2013 11:11 am   Subject: Next newbie question, coil packs

The Escort/Fiesta/Mondeo/etc coil packs are all interchangeable as far as EDIS/Megajolt is concerned.
PostForum: Q&A   Posted: Fri Jun 28, 2013 2:52 pm   Subject: Different systems

There's no purchase required to change the map - you just do it! The software is free and the mapping cable should come with the ECU.
Page 1 of 19 Goto page 1, 2, 3 ... 17, 18, 19  Next
All times are GMT