RegisterSearchFAQMemberlistUsergroupsLog in
Search found 138 matches
Author Message
PostForum: OBDII PIDs discussion   Posted: Thu Jul 12, 2018 12:04 am   Subject: Monitoring OBDII Traffic

I am hooked up to OBDII through the classic adapter, no CAN bus on this car. Does this still apply?
PostForum: OBDII PIDs discussion   Posted: Sat Jun 23, 2018 6:26 am   Subject: Monitoring OBDII Traffic

I have a 2005 vehicle, that uses OBDII. I have the classic adapter and I can get the standard PIDs to show up in the RaceCapture software. I also have a DiabloSport Trinity that has access to the en ...
PostForum: Telemetry   Posted: Mon Oct 30, 2017 6:09 pm   Subject: FreedomPop $ZERO/month plan works with RaceCapture telemetry

Somewhat related, but I use FreedomPop for my cell phone. I have had it for nearly two years now and it has been a pretty good service. The one thing I will caution is that if you ever need support ...
PostForum: Sensors   Posted: Wed Oct 18, 2017 6:23 pm   Subject: Slow response on digital brake input?

It doesn't help your situation but I have a similar setup except I just wired the brake switch on my car to an analog input. Anything over zero and I know the pedal is being pressed. The brake switc ...
PostForum: Lua Scripting   Posted: Tue Sep 26, 2017 5:56 pm   Subject: Im going insane. Help required geeting 2 scripts to work

The problem is almost certainly two onTick functions. Get rid of the top onTick function

function onTick()
updateFuelAvg(getAnalog(0)) ...
PostForum: ShiftX2   Posted: Fri Aug 25, 2017 1:11 pm   Subject: button state example

The example script has this implemented.

function sxOnBut(b)
--called if the button state changes
println('button: ' ..b)

This is where it is called:
function sxChkCan()
id,ext,da ...
PostForum: Sensors   Posted: Tue Aug 22, 2017 7:02 pm   Subject: GM Flex Fuel Sensor

I have not tried that. I've screwed around with this enough and now that I have a working solution I'm inclined to just leave well enough alone. As for where I saw that, it is here: https://wiki.aut ...
PostForum: ShiftX2   Posted: Tue Aug 22, 2017 1:59 am   Subject: ShiftX2 wiring harness

Here is mine. It is wired according to the install here:
PostForum: Lua Scripting   Posted: Mon Aug 21, 2017 1:38 am   Subject: Can you help me with a few data logging concepts?

The log is just a simple csv file. You configure the rate you want each channel logged in the RaceCapture app by selecting the frequency. It is sparsely populated in that you will see empty entries ...
PostForum: Lua Scripting   Posted: Sun Aug 20, 2017 2:14 pm   Subject: Lua scripting IDE?

Try the mouse wheel.
PostForum: Lua Scripting   Posted: Sun Aug 20, 2017 2:13 pm   Subject: Can you help me with a few data logging concepts?

Logging is handled by the RaceCapture device, you don't need to do anything other than starting and stopping it. You do that by using lua to start and stop the log or by pushing the button on the uni ...
PostForum: Sensors   Posted: Sat Aug 19, 2017 7:06 pm   Subject: GM Flex Fuel Sensor

I am pretty sure I am just missing a setting in the RCP to make this work. I hooked up an Arduino with a 22k resistor on the input, wrote a little bit of code and I am able to get the ethanol content ...
PostForum: OBDII PIDs discussion   Posted: Mon Aug 14, 2017 5:19 pm   Subject: How much current can I source though the OBD2CAN???

I have the OBDII adapter on a 2005 neon and when compared to the tach driver input I have the OBDII RPM data shows a significant lag.
PostForum: RaceCapture/Pro General Q&A   Posted: Mon Aug 14, 2017 5:14 pm   Subject: Power over OBD2 question

You can cut one of the ends off the RJ45 cable that connects the OBDII adapter to the RaceCapture and then put on a new end. Before adding the new end cut the wire that goes into pin 8 on the connecto ...
PostForum: Sensors   Posted: Tue Aug 08, 2017 11:51 pm   Subject: GM Flex Fuel Sensor

It seems as though the blending of e85 in my area has become very inconsistent so I would like to revisit this. My first question is will this work with the RCP? Right now I have it hooked up to one ...
Page 1 of 10 Goto page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10  Next
All times are GMT