RegisterSearchFAQMemberlistUsergroupsLog in
Search found 31 matches
Author Message
PostForum: Operation   Posted: Thu Sep 15, 2011 10:05 am   Subject: switching a relay

not at all alexander thats v helpfull .
what i want to do is open a lpg valve on my engine when above atmos,just into boost ,and when above 3k rpm and switch off above 4.5k rpm.
PostForum: Operation   Posted: Tue Mar 22, 2011 2:02 pm   Subject: switching a relay

Hi Ivan,

This should help:
http://www.autosportlabs.net/MJLJ_V3_vehicle_installation_guide#User_defined_outputs_and_Shift_Light

thank you brent ,thats very handy .

i could not see any refere ...
PostForum: Operation   Posted: Sun Mar 20, 2011 5:18 pm   Subject: switching a relay

just a quick question ,

i'm trying to use the mj to switch on a solenoid that will bypass propane at a set rpm and boost level ,

if i connect a relay switch wire to a switched to earth terminal ...
PostForum: New Project Suggestions   Posted: Fri Oct 29, 2010 4:16 pm   Subject: knob in car

'''This technique works with the V3 as well, as it too supports the option switch. I think you're confusing the AUX input feature...

With regards to using the AUX input for correcting ignition adv ...
PostForum: New Project Suggestions   Posted: Thu Oct 28, 2010 3:32 pm   Subject: knob in car

Sounds like you need to train your ears Ivanhoew, lol. I have seen a rolling road where they got a set of ear duffs and had a plastic tube running to the engine block to hear predetonition. Its quit ...
PostForum: New Project Suggestions   Posted: Wed Oct 27, 2010 11:22 pm   Subject: knob in car

Cool idea.

You could do this today using the AUX input and have the ignition correction sub-map bump the map up and down as needed.

see the 'operation guide' on how this might work.

would thi ...
PostForum: New Project Suggestions   Posted: Wed Oct 27, 2010 6:02 pm   Subject: knob in car

Maybe for adjusting overall timing correction on the fly.


exactly, dr .occa.

my turbo mini a series engine is all iron ,and i find it hard to detect detonation on the rd , in fact , i was at a ...
PostForum: New Project Suggestions   Posted: Wed Oct 27, 2010 5:40 pm   Subject: knob in car

really sorry if this has been covered , but has anyone ever created a situation where ,while using a mjlt v3 ,you have a rotary knob on the dash that will advance and retard ignition from its setting ...
PostForum: Operation   Posted: Thu May 13, 2010 7:10 am   Subject: Configurator and megajolt compatibility between versions

Hi Oliver

Try this page for the downloads http://www.autosportlabs.net/MJLJ_V2_Downloads

V4.02 software only works with the V4 megajolts
V3.?? software only works with the V3 megajolts
and V2 ...
PostForum: Operation   Posted: Thu May 13, 2010 7:07 am   Subject: Configurator and megajolt compatibility between versions

Hi Oliver

Try this page for the downloads http://www.autosportlabs.net/MJLJ_V2_Downloads

V4.02 software only works with the V4 megajolts
V3.?? software only works with the V3 megajolts
and V2 ...
PostForum: Operation   Posted: Tue Feb 23, 2010 8:36 pm   Subject: 89 RRC 3.5 LPG. New MJ install, cold start and backfires.

could the backfiring be associated with it running on waste spark? i m running mjlt on a 16 16v astra engine ,and in the cold weather get a lot more back firing just off idle , than i did on a 2 litre ...
PostForum: Operation   Posted: Tue Feb 23, 2010 8:35 pm   Subject: 89 RRC 3.5 LPG. New MJ install, cold start and backfires.

could the backfiring be associated with it running on waste spark? i m running mjlt on a 16 16v astra engine ,and in the cold weather get a lot more back firing just off idle , than i did on a 2 litre ...
PostForum: Installation   Posted: Thu Jun 11, 2009 7:04 am   Subject: gm vauxhall X16XEL trigger wheel

in case it helps , knocked this up out of 6mm plate ,drilled a ring of holes then turned it down

regards
robert


http://i32.photobucket.com/albums/d44/ivanhoew/Photo-0281.jpg


http://i32 ...
PostForum: Future Upgrades   Posted: Thu Jun 19, 2008 9:37 am   Subject: MJLJ V4 in testing

There is a four pin output connectur shown in the installation sheet, including
a knock output signal. Interesting...

http://www.turboxs.com/uploaded_images/558.pdf
well spotted that man ! Very Happy
PostForum: Future Upgrades   Posted: Sat May 24, 2008 4:36 pm   Subject: MJLJ V4 in testing

hi brent ,hope your well and the mr2 is keeping cool,
, heres an idea , i have a turbo xs knock lite on my mini ,that one tunes to the engine and seems to work v sensitively ,
it fires a red and a ...
 
Page 1 of 3 Goto page 1, 2, 3  Next
All times are GMT