RegisterSearchFAQMemberlistUsergroupsLog in
Search found 75 matches
Author Message
PostForum: Bug Reporting   Posted: Mon Oct 29, 2018 12:42 am   Subject: Help Please Global controller Option

Did you possibly forget to write it permanently ?
PostForum: Installation   Posted: Mon Apr 30, 2018 7:10 pm   Subject: need pinout for Megajolt E1

https://wiki.autosportlabs.com/MegaJolt_Lite_Jr.
PostForum: Installation   Posted: Mon May 08, 2017 9:59 pm   Subject: Rev counter issues.

Nice one, very nice Marcos as well, was at the Mk1 conversions track day the other week. Not seen so many marcos's gtm's etc. Usually quite a strong irish contingent as well.
Should really get around ...
PostForum: Installation   Posted: Wed Oct 05, 2016 9:27 pm   Subject: Rev counter issues.

I have exactly the same problem, mini with a MGB rev counter.
Some where on the forum theres a suggestion to remove one of the resistors on the tacho conditioning board. Just not got around to trying ...
PostForum: Operation   Posted: Fri Apr 22, 2016 2:16 pm   Subject: running in limp home mode

Thats your problem, it won't work on anything less than 12volts.
PostForum: Q&A   Posted: Tue Jul 28, 2015 3:12 pm   Subject: Trigger wheel mounting vor V8

If you look on this page theres a illustration that confirms 50 degrees for a V8.

http://www.autosportlabs.net/MJLJ_V4_vehicle_installation_guide#Typical_Trigger_Wheel_Installation
PostForum: Installation   Posted: Mon Dec 08, 2014 7:30 pm   Subject: 2.5L V6 individual runner vacuum reservoir volume.

Wouldn't expect those to work anyway, look at the float bowl. This needs to be level.
PostForum: Installation   Posted: Sat Oct 04, 2014 3:15 pm   Subject: Almost there with MegajoltV3

I might have been talking shite, as I hadn't noticed your on the V3 model. Mines actually the V4, think we'll need to wait until someone else gives you the correct info.
PostForum: Installation   Posted: Sat Oct 04, 2014 2:32 pm   Subject: Almost there with MegajoltV3

This should help:
http://www.autosportlabs.net/MJLJ_V3_vehicle_installation_guide
PostForum: Installation   Posted: Sat Oct 04, 2014 1:37 pm   Subject: Almost there with MegajoltV3

1. Seem to remember it does mention somewhere on the site, a 5amp fuse is used for the megajolt. Anyway thats what I've got on mine.

2. The vacuum advance take off will be suitable, as long as it p ...
PostForum: Q&A   Posted: Sun Sep 28, 2014 9:59 am   Subject: Megajolt coil

Have you got resister plugs in ? Can see the BP but can't make out whether there the R after that, also open the plug gaps upto 1mm. I run BPR7ES's in mine with a similar spec engine.
PostForum: Ignition Map Library   Posted: Sun Sep 28, 2014 9:35 am   Subject: MAP NEEDED 1380cc mini rally car

I started with the 'MiniSPi2-MD286.mjlj' (it's quite a soft map) and went from there, adjusting it to suit your engine. Ideally with a wideband AFR gauge connected.
PostForum: Assembly   Posted: Sat Jul 19, 2014 7:13 pm   Subject: MAP to TPS

Yes the instructions are somewhere in here, you can get all the bits needed in the autosport labs shop. Not sure about leaving them in place, but I know you can't use both.
PostForum: Operation   Posted: Thu Apr 24, 2014 11:39 pm   Subject: Now it won't start!!

Charge the battery up, megajolt won't play unless it has the full 12 volts.
PostForum: Installation   Posted: Sun Mar 09, 2014 12:45 am   Subject: Analog input (i need help)

I'm sure someone will be along soon, but just so you know your not alone, I've also held off doing this to mine, as I also didn't think the instruction was very clear.
 
Page 1 of 5 Goto page 1, 2, 3, 4, 5  Next
All times are GMT