Hi,
Try updating the app to at least 2.10.5 - we introduced fixes that improved wifi connection stability.
Thanks, and let us know if that works for you.
Search found 6723 matches
- Tue Jun 20, 2023 9:06 pm
- Forum: RaceCapture App Bug Reporting / Feature Requests
- Topic: iPad connection instability
- Replies: 3
- Views: 7034
- Tue Jun 20, 2023 9:04 pm
- Forum: RaceCapture/Pro General Q&A
- Topic: Failed firmware upgrade help
- Replies: 1
- Views: 5009
Re: Failed firmware upgrade help
Hi,
You can simply try the firmware upload again. Go to Setup, load a previously saved config file from the same device, and then go to the firmware tab, and go through the process again.
You can simply try the firmware upload again. Go to Setup, load a previously saved config file from the same device, and then go to the firmware tab, and go through the process again.
- Tue Jun 20, 2023 9:04 pm
- Forum: RaceCapture App Operation and General Q&A
- Topic: Raspberry Pi support - enables a hard-wired, dedicated dash
- Replies: 127
- Views: 852212
Re: Raspberry Pi support - enables a hard-wired, dedicated dash
Great, thanks for the update!
- Tue Jun 13, 2023 6:15 pm
- Forum: Sensors
- Topic: Tirex sensor wiring damage
- Replies: 1
- Views: 14548
Re: Tirex sensor wiring damage
Hi Zach, sorry we missed this earlier. If you haven't had it fixed yet, you can email [email protected] for more help.
- Thu Jun 08, 2023 4:37 am
- Forum: RaceCapture App Operation and General Q&A
- Topic: Raspberry Pi support - enables a hard-wired, dedicated dash
- Replies: 127
- Views: 852212
Re: Raspberry Pi support - enables a hard-wired, dedicated dash
For the resolution, we will watch out for additional reports on this. A fresh install of bullseye with the app installed per the instructions should work right out of the box with the official display. Yes, the direct mapping is much faster. If you have the same channel name defined in multiple plac...
- Tue Jun 06, 2023 3:00 pm
- Forum: CAN mapping discussion
- Topic: Link G4+
- Replies: 15
- Views: 39971
Re: Link G4+
Hi Keith, are you still using the Lua script for mapping? Does the built-in CAN mapping preset for the Link work for you? If so, I would switch to that, since it will run more efficiently than the Lua script, and then you can preserve your Lua script for other tasks.
- Tue Jun 06, 2023 2:57 pm
- Forum: RaceCapture App Operation and General Q&A
- Topic: Raspberry Pi support - enables a hard-wired, dedicated dash
- Replies: 127
- Views: 852212
Re: Raspberry Pi support - enables a hard-wired, dedicated dash
Hi, 1. Fullscreen mode crash on the Pi will be fixed in the 2.10.5 release. In the meantime, please avoid setting this (it's fullscreen anyway on the Pi) 2. Not correct. The RC app, when installed per the instructions runs in 800x600 mode. https://wiki.autosportlabs.com/RaceCapture_on_Raspberry_Pi 3...
- Tue Jun 06, 2023 2:53 pm
- Forum: New Project Suggestions
- Topic: Raspberry Pi Camera Support
- Replies: 1
- Views: 6637
Re: Raspberry Pi Camera Support
Hi, here are the instructions for setting up video+data livestreaming:
https://wiki.autosportlabs.com/Video_pl ... acecapture
Raspberry Pi is not supported due to the minimum system requirements (it just does not have the CPU/GPU performance).
https://wiki.autosportlabs.com/Video_pl ... acecapture
Raspberry Pi is not supported due to the minimum system requirements (it just does not have the CPU/GPU performance).
- Tue Jun 06, 2023 2:51 pm
- Forum: RaceCapture/Pro General Q&A
- Topic: Creating logs from datastore.sq3 file?
- Replies: 2
- Views: 13019
Re: Creating logs from datastore.sq3 file?
Hi, what version of the app are you running? The recent app has some fixes around how files are exported, so make sure you update it. Are you prompted for a name when exporting? Also, what version of android is the device running on? Technically speaking, the datastore.sq3 can be moved to the deskto...
- Thu Apr 27, 2023 2:38 pm
- Forum: RaceCapture App Operation and General Q&A
- Topic: New RCP mk4 setup - logging data but nothing displayed in PC app: Analysis
- Replies: 4
- Views: 7438
Re: New RCP mk4 setup - logging data but nothing displayed in PC app: Analysis
Hi, For posterity, the solution was to ensure Lap Timing was enabled in the system. Without it, the ElapsedChannel isn't defined, which analysis needs for indexing time for the playback and line charts.
- Tue Apr 25, 2023 5:18 pm
- Forum: Hardware and Installation
- Topic: connecting to can bus on 2018 mustang gt350
- Replies: 1
- Views: 7194
Re: connecting to can bus on 2018 mustang gt350
Hi, often the streaming CAN bus data is available on the OBDII port, along side the OBDII communications. Have you tried to see if data is being broadcasted there?
- Tue Apr 25, 2023 5:17 pm
- Forum: RaceCapture App Operation and General Q&A
- Topic: New RCP mk4 setup - logging data but nothing displayed in PC app: Analysis
- Replies: 4
- Views: 7438
Re: New RCP mk4 setup - logging data but nothing displayed in PC app: Analysis
Hi, are you just testing with the car static, or is it moving, such as on a race track, or in a circuit?
Is this data imported into your PC after recording to an SD card? Can you zip the log and attach it here?
Thanks,
Is this data imported into your PC after recording to an SD card? Can you zip the log and attach it here?
Thanks,
- Mon Mar 06, 2023 3:29 pm
- Forum: CAN mapping discussion
- Topic: Link G4+
- Replies: 15
- Views: 39971
Re: Link G4+
Hi Keith, The presets are just a convenient way to load channels into the CAN mapping feature; each individual channel is otherwise fully editable. The mapping system is documented here: https://wiki.autosportlabs.com/CAN_Bus_Integration In addition to system presets, you can also save your own cust...
- Fri Mar 03, 2023 4:51 pm
- Forum: OBDII PIDs discussion
- Topic: BMW E36 / MS41 OBD mapping
- Replies: 11
- Views: 25540
Re: BMW E36 / MS41 OBD mapping
Would be cool, since this platform is still pretty popular!
- Fri Mar 03, 2023 4:50 pm
- Forum: CAN mapping discussion
- Topic: Link G4+
- Replies: 15
- Views: 39971
Re: Link G4+
However, you should be using the Link direct CAN preset we have in the system, instead of the Lua script - it works much better and has faster response.
https://wiki.autosportlabs.com/CAN_Bus_Integration
Note that this post was from 2017, before we had the direct CAN integration available.
https://wiki.autosportlabs.com/CAN_Bus_Integration
Note that this post was from 2017, before we had the direct CAN integration available.