Autosport Labs

After a lot of messing about I have successfully implemented bluetooth comms on my V3 and using a windows based tablet, (Linx10) which runs a full version of windows 8.1 the original windows configurator program runs and communicates over the bluetooth perfectly. I'm going to build a better bluetoot...

I now have Bluetooth comms working fine between my PC and my V3 MegaJolt... it took a while to get it working as I had some confusion over com ports and the way Windows installs the blutooth stuff, but it works just great. As per my post in the QA section, will the PC configurator software run on Wi...

Can anybody please advise as to whether or not the normal PC configurator software will run on a Windows phone or tablet?

Will this work on a Windows phone or tablet?

Anybody? I know the baud rate is correct because I get exactly the same through my Bluetooth connection to the MjLj... the tuner software works fine through the Bluetooth serial ports too which is encouraging. Just need to get my head around the Serial commands and the nonsense they seem to return. ...

I'm trying desperately to make sense of the Serial API with sending characters to the MJLJ V3 and reading what it returns, but if I send the characters as listed in the API, most do nothing, such as 'V' and others seem to return complete nonsense compared to what the API says they should return. I'm...

Any progress with the BT tuner? Is support for the V3 in the pipeline.

Ah, so I need to set the BT adaptor up to 4800 baud then. Will try that later today. Edit: tried it... nothing works. Baud on BT module now at 4800. I have a Bluetooth adaptor on my PC and it will pair with my module, but it seems to assign 2 com ports within windows... one incoming and 1 outgoing. ...

I'm trying to understand the Controller API for the V.3 unit. I have a Galaxy S II phone running Android 4 and want to send the commands such as 'V' to return the Version from the MJLJ via my Bluetooth module. I can connect using various 'Terminal' apps but nothing returns any data when I send these...

Will it have support for V3 users?

Has anyone managed to sort the app for the V3 comms yet?

Absolutely no rush whatsoever. My car is off the road until next year now and the old v3 works brilliantly and the laptop works great for tuning too. The android BT app would be nice but is by no means essential. Glad we've found this now before v3 peeps start trying it in volume. Good luck with it....

Sadly I know nothing about Android development. I build circuit boards for a living but don't know anything about software. I am willing to learn though. As for vibration, we use these terminals at work in environmental noise monitoring equipment and they seem quite robust, but time will tell I gues...

Quite relieved to hear you say it might be a slightly different protocol.

What do you think of the way I've fitted the module? Decided it wouldn't work in the case as it would be a Farraday Cage being all metal...

Tried swapping Rx and Tx with the baud as received which was 9600, same result. I'll have to swap the baud back to 9600 then