Autosport Labs

If I set the Pulse Per Revelotion to 2, it is much closer now, about 200rpm off.
Off: 498
At Idle: ~850rpm
1000: ~1200
2000: 2150
3000: 2150

Actually close enough.

-Scott

Still reading too high. At idle it reads ~1700rpm. At 2000rpm it reads 5600rpm. When I shut off the motor it reads 997.

Car is 1991 E30 BMW 318is M42 4 cylinder DIS.

RA 1.11
RCP Firmware 1.1.12

Under Advanced Setting for Pulse:
Mode: RPM
Clock Divider: Clock/128
Pulse Per Revolution: 1

-Scott

Hi, We have a preliminary fix for this issue; you can find the 1.1.11 firmware here: http://dropcanvas.com/bthz0 I didn't do a general release as there are some new API stuff mixed in to enable the mobile app. It's mostly additive stuff with mostly sane refactoring of existing code; please test it ...

All of my log files have the same date. 12/31/1999 11:00 PM, making it hard to easily figure out when they were actually logged.

-Scott

I had the same issue. Not sure if I had the 1.1.10 or 1.1.11 firmware (this was last month).

-Scott

Not sure if it is possible, but a neat way to do it would be to instead of having one logging rate that does both SD Card and Telemetry, is to have 2 'logging' rate drop downs. Once rate for the SD Card, and another rate for 'Telemetry' You could select 0Hz to disable logging to either the SD Card o...

Do I need to hook a wire to analog 8 to do that?

Brian, can you give me the color wires and wire numbers for the back of the gauge cluster for Water Temp, Fuel Level, and RPM?

-Scott

Everytime I click on the Sensor Analyzer button it crashes Race Analyzer. Basically a small window starts to pop up, then I get a Windows error window saying: raceAnalyzer.exe raceAnalyzer.exe has stopped working Windows can check online for a solution System: Win7 Home Premium SP1 64bit. RA: V1.1.1...

Is it possible to have the system log voltage and just use pin2, since that is hooked up to the power source anyway?

-Scott

Here is how to capture the TPMS info wirelessly.
http://www.winlab.rutgers.edu/~Gruteser ... pdf#page=5

-Scott

Can you add an option to log at 2Hz? Right now I think it is 1, 5, 10, 20, etc. Also is there a way to log certain data points/sensors without transmitting them via telemetry? Would be useful to help keep the bandwidth usage down, but still be able to see the info you want after the session. -Scott

Can you add a bug reporting section as well as a feature request section to the RCP forums. Would be way easier to log and track these things.

-Scott

I'm assunming the brake light switch 'sensor' is safe to connect to one of the Analog Input 1-7? I think it may be 12v so not sure of that would hurt the race capture. Also I just want it to be on/off. How would I set up and configure that?

-Scott

Dude, 1:45 is pretty quick for chicane, nice! What type of db is the data stored in? What kind of web server?