Search found 69 matches
- Wed Oct 14, 2020 4:10 pm
- Forum: RaceCapture/Track Installation
- Topic: Unit no longer powering up when connected via OBII
- Replies: 1
- Views: 4313
Re: Unit no longer powering up when connected via OBII
I have a racecapture/track mk2 that was working great however this past weekend seems was no longer receiving power from the obdII connection. Powers on fine from the usb connection. My obdII reader receives power and not sure what the issue is. Any help appreciated. Have you ohm'd out the power li...
- Sun Oct 04, 2020 3:51 pm
- Forum: Lua Scripting
- Topic: Problems accessing Data from Mega Squirt in LUA. Any advice
- Replies: 3
- Views: 6898
Re: Problems accessing Data from Mega Squirt in LUA. Any advice
If anyone is in a similar issue, I like to use the Can Realtime Broadcasting instead, since you can better control the rate information is sent and have access to more channels. The info from Megasquirt is here http://www.msextra.com/doc/pdf/Megasquirt_CAN_Broadcast.pdf The base ID is 1520 and the l...
- Sun Oct 04, 2020 3:41 pm
- Forum: Lua Scripting
- Topic: How to Control your Megasquirt Outputs with Lua and canbus
- Replies: 1
- Views: 5764
How to Control your Megasquirt Outputs with Lua and canbus
I thought this might be helpful, you can control the Programmable On/Off outputs as well as the PWM outputs on a mega squirt using your RaceCapture though Canbus. Here are the outputs im referencing. https://www.roadraceautox.com/img/Canyonfive/megacontrol.jpg On the Racecapture side, the possibilit...
- Sat Oct 03, 2020 6:20 am
- Forum: CAN mapping discussion
- Topic: Sharing/Outputting GPS or Wheel speed to megasquirt
- Replies: 4
- Views: 6766
Re: Sharing/Outputting GPS or Wheel speed to megasquirt
OK. I have edited the title and the first post to reflect the reality and the changes. After logging my wheelspeed (vss1) from the Megasquirt vs the GPS speed at 25Hz its clear there is a lag and its not good enough for Launch control / traction control. However the MK3 Pro has 4 wheelspeed inputs. ...
- Thu Oct 01, 2020 3:52 pm
- Forum: CAN mapping discussion
- Topic: Bitwise AND operators , interpreting Engine Status
- Replies: 1
- Views: 5038
Bitwise AND operators , interpreting Engine Status
So, I'd like to map a channel for my clutch switch which is wired to my megasquirt. The clutch switch is wired to "Launch in" so when that is active my clutch is depressed. "Launch in" is located in Engine Status 2, status1-8 These bitfield variables is a combination of binary bi...
- Thu Oct 01, 2020 4:29 am
- Forum: General Discussion
- Topic: Actually going to be upgrading the forums.
- Replies: 11
- Views: 10583
Re: Actually going to be upgrading the forums.
Just a heads up. The "code" sections are now all weird. Very hard to read as the update took out all the non alpha numeric characters.
- Mon Sep 28, 2020 3:42 pm
- Forum: OBDII PIDs discussion
- Topic: OBDII PIDs from CAN ID 2026 (0x7EA)
- Replies: 10
- Views: 12450
Re: OBDII PIDs from CAN ID 2026 (0x7EA)
can you use the race capture to log what is sent from your VCDS tool to the ecu and received from the ecu?
- Fri Sep 25, 2020 8:58 pm
- Forum: CAN mapping discussion
- Topic: Sharing/Outputting GPS or Wheel speed to megasquirt
- Replies: 4
- Views: 6766
Re: Sharing/Outputting GPS speed to megasquirt
Well... Yeah... As far as sending messages that the Megasquirt understands, I can now do that. The next challenge is to get the Megasquirt to allow me to write to Canvvs2 which I'll take up on the MSextra forum. For those reading I did what was done in the other thread, but for testing I used fuel p...
- Fri Sep 04, 2020 3:19 pm
- Forum: General Discussion
- Topic: Here is what you can do with a RaceCapture and $28 shock sensors
- Replies: 5
- Views: 6888
Re: Here is what you can do with a RaceCapture and $28 shock sensors
I do, but I need to know the slope of the line to derive the roll/pitch gradients.
- Tue Sep 01, 2020 2:44 am
- Forum: General Discussion
- Topic: Here is what you can do with a RaceCapture and $28 shock sensors
- Replies: 5
- Views: 6888
Here is what you can do with a RaceCapture and $28 shock sensors
Overall Roll, Front and Rear Roll, and thus your measured roll gradients. Pitch too if you want. Heave.... I could go on. OMG I love this thing. (axis's changed), but if you have the sensors and want the formulas I'm happy to share. https://www.roadraceautox.com/img/Canyonfive/FrontRearOverallRoll.j...
- Wed Aug 26, 2020 10:13 pm
- Forum: RaceCapture/Track Introductions
- Topic: Greetings from Nebraska
- Replies: 5
- Views: 5399
Re: Greetings from Nebraska
Very cool. For the GLORY!!!! Lol.
Glad to see another autoxer. Are you incorporating it with solostorm as well?
Glad to see another autoxer. Are you incorporating it with solostorm as well?
- Wed Aug 19, 2020 7:48 pm
- Forum: Sensors
- Topic: Cheap shock potentiometers
- Replies: 1
- Views: 5113
Cheap shock potentiometers
If anyone wants some, $28... each https://www.amazon.com/gp/product/B0089RT00W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 not affiliated. Also Ballenger motorsports sells the plug if you want to make a wiring harness. pinout. https://www.thecombineforum.com/attachments/img_20190515_203421_1...
- Wed Aug 19, 2020 7:19 pm
- Forum: Hardware and Installation
- Topic: Analog Outputs on RaceCapture Mk2
- Replies: 3
- Views: 4707
Re: Analog Outputs on RaceCapture Mk2
post your script for what you are doing....
also what kind of signal is the gauge looking for?
also what kind of signal is the gauge looking for?
- Wed Aug 19, 2020 2:34 am
- Forum: RaceCapture/Track Operation
- Topic: Sensors?
- Replies: 6
- Views: 6186
Re: Sensors?
Hi, My friend uses your RaceCapture Pro Mk 2 on his car and suggested that I consider your RaceCapture/Track. I'd like to be able to monitor my Oil Pressure and perhaps my Oil Temperature. Does the RaceCapture/Track have the capability to add these sensors at all? This system would be used in a 200...
- Tue Aug 18, 2020 9:23 pm
- Forum: RaceCapture/Track Operation
- Topic: Sensors?
- Replies: 6
- Views: 6186
Re: Sensors?
Hi, My friend uses your RaceCapture Pro Mk 2 on his car and suggested that I consider your RaceCapture/Track. I'd like to be able to monitor my Oil Pressure and perhaps my Oil Temperature. Does the RaceCapture/Track have the capability to add these sensors at all? This system would be used in a 200...