V3.3.1 bug found??

Report problems on the Megajolt firmware and PC software

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
mr_bridger
Posts: 52
Joined: Wed May 16, 2007 10:29 pm
Location: Coventry, UK

V3.3.1 bug found??

Post by mr_bridger »

Hi Brent,

ive not been about for a bit, been doinf some major bodywork on another car, and i only just got round to updating my V3's to the latest firmware.

As ive had the engine apart, i thought id make use for the trigger offset feature, save me adjusting the crank pulley / trigger wheel.

now when i try to "write options" i get the following error message, although it seems as though it works ok.

Laptop is very basic Pentium 3, 320mb ram, running XP, and im using a serial cable.

all updates and communications work fine, as does programming and flashing.

seems to do it in both V3.3.0 and v3.3.1 versions. (p.s. what the difference?)

Cheers
Ross.
Attachments
Image.JPG
Image.JPG (86.64 KiB) Viewed 13893 times

luke6040
Posts: 113
Joined: Wed Dec 05, 2007 12:48 am
Contact:

Post by luke6040 »

I get this aswell but have put off posting it lol!.
Im running XP64bit, standard serial cable ect.

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Thanks, guys. I'll verify on my end. So other than the error, you are verifying the values are indeed written after a power cycle?
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

mr_bridger
Posts: 52
Joined: Wed May 16, 2007 10:29 pm
Location: Coventry, UK

Post by mr_bridger »

ill have to verify that, but it certainly updates it, as i watched the timing flicking back and forth as i changed the figure.

didnt re-check after a power cycle....

will do though.

Ross.

luke6040
Posts: 113
Joined: Wed Dec 05, 2007 12:48 am
Contact:

Post by luke6040 »

on mine as far as i can tell the values are there after a power cycle, i will double check tomorrow tho.

mr_bridger
Posts: 52
Joined: Wed May 16, 2007 10:29 pm
Location: Coventry, UK

Post by mr_bridger »

Had a checke, and my values stay after a cycle too.

Ross.

Post Reply