Might be of interest...

General discussion on Autosport Labs, the mission, website, content, etc.

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
david jenkins
Posts: 204
Joined: Tue Feb 14, 2006 2:14 pm
Contact:

Might be of interest...

Post by david jenkins »

Following on from Brent's announcement regarding the next firmware upgrade, some folk might be interested in this device.

The designer of the JAW Lambda/AFR unit is planning to produce a very small sensor management unit that will give a 0 - 5v output. I'd guess that it could be used as an analogue input to Megajolt, by the look of it.

Could be worth watching!

David

DannyP
Posts: 417
Joined: Sun Apr 09, 2006 3:48 pm

Post by DannyP »

I can see it now, this board, a 7805 regulator, a few 3914/3915 led drivers cascaded, and a nice 30 or more led bargraph dislay. Put it all in a 2" gauge pod, and if it's less than $300 like all the commercial models, it would be a hit.

david jenkins
Posts: 204
Joined: Tue Feb 14, 2006 2:14 pm
Contact:

Post by david jenkins »

I'd be more interested in putting it inside the MJ box to supplement the data logging - and to drive a row of LEDs! :D

Post Reply