1900cc honda motor...SOHC

Browse and share Ignition Configurations in this forum

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
hondalude86
Posts: 2
Joined: Sat Jul 30, 2011 3:29 am
Location: Colorado

1900cc honda motor...SOHC

Post by hondalude86 »

Engine Mfg: Honda
Engine Code: ET2
Cylinders: 4
Displacement (cc): 1900cc
Rev Limit: 7.5k
TPS or MAP: MAP
Boosted or Normally Aspirated: NA
If Boosted- max Pressure (KPa): (at high altitude, highest KPa reads at 86kpa when the car is off
Modifications: Dual Weber 45DCOE, 285i/e w/12mm lift, 11.5:1 compression 4-1 Header with 2.25 collector. No Head mods
Chassis: AB1 (1986 Honda Prelude)
Notes: At high altitude (5300ft-10000ft above sea level)

hondalude86
Posts: 2
Joined: Sat Jul 30, 2011 3:29 am
Location: Colorado

Post by hondalude86 »

well, here is the map i'm running right now, and its kicking ass, probably could use more advance up top, but here it is anyway!
Attachments
A20-DCOE-CB-07302011.mjlj
A20 ITB ideal map adjusted for Altitude
(786 Bytes) Downloaded 1206 times

808asianeering
Posts: 2
Joined: Wed Aug 11, 2010 10:19 pm
Location: in the middle of tsunami zones

Post by 808asianeering »

hondalude86 do you have a diagram on how you wired the mj into the oem honda wiring?

i am doing an f23a sohc project and was wondering if you could help me with the setup...

thanks in advance
We build CORRECTLY for COMPETITION;
NEVER for CONVENIENCE or CONVERSATION...

Post Reply