Spitfire IV

Browse and share Ignition Configurations in this forum

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
Matt306
Posts: 5
Joined: Fri Dec 14, 2018 10:26 am

Spitfire IV

Post by Matt306 »

Trying to make a base map based on the factory values in the Triumph Manual. I am new at this so all help appreciated.

My Spit IV engine is pretty standard, MK IV 1296, Twin HS2 , i have put in a Canleys Spit Mk 3 Cam and four port exhaust manifold which are the only 'performance' upgrades, needles are AAN which are a slight bit narrower than standard.

I have used the excellent spread sheet here viewtopic.php?t=2632 but as you can see from the factory manual there are only 6 points to plot so i have included 4 more to complete the curve.

What I have noticed is there is a big pick up from idle advance to where the second 1400 RPM bin kicks in.

Any help / thoughts appreciated
Attachments
mattbase.mjlj
(717 Bytes) Downloaded 761 times
mjljmk14curve.xls
(54.5 KiB) Downloaded 763 times
rsz_20190316_082953.jpg
rsz_20190316_082953.jpg (243.3 KiB) Viewed 91233 times

Post Reply