Site banner artwork- need your pics!

Autosport Labs news and product announcement discussion.

Moderators: JeffC, rdoherty, stieg, brentp

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Done! Added pics from TwoSheds, AndyGT6 and Midas. Thanks! :)

AndyGT6
Posts: 25
Joined: Thu Sep 06, 2007 12:13 pm
Location: Cheshire

Post by AndyGT6 »

Thanks Brent, the pictures look superb, puts a smile on my face every time I see my car up there :D .

Andy

Midas
Posts: 54
Joined: Sun Oct 19, 2008 9:56 pm
Location: Devon

Post by Midas »

Woohoo! My little car is famous!

dr.occa
Posts: 243
Joined: Fri Feb 23, 2007 10:52 pm
Location: TX

Post by dr.occa »

here are a few from me brent:

Image

Image

Image
AUTOSPORTLABS
NonStop Tuning
www.86garage.com

"Poverty is not a virtue."

NITROPIXIE
Posts: 704
Joined: Sun Sep 07, 2008 1:54 pm
Location: Fareham, GB

Post by NITROPIXIE »

The top picture looks sick dr occa, well impressed :shock:
1310 A-series Mini, lightened and built myself. V4 board and loving it

Rasputin22 - The Mini Forum
Rasputin22 - MK1 Golf Forum

Megajolt repair for the UK available

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Thanks, Jonas!

Whenever you get tired of your Corolla, I'm first in line to buy it. :)
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

cng1
Posts: 282
Joined: Mon Dec 06, 2004 7:56 pm
Contact:

Post by cng1 »

OK, here's a couple of one of our fleet:

Image
Image
Official Megajolt distributor for UK and Europe.
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Fantastic! Thanks, Chris!

dr.occa
Posts: 243
Joined: Fri Feb 23, 2007 10:52 pm
Location: TX

Post by dr.occa »

cng1, love that flip up front!
AUTOSPORTLABS
NonStop Tuning
www.86garage.com

"Poverty is not a virtue."

cng1
Posts: 282
Joined: Mon Dec 06, 2004 7:56 pm
Contact:

Post by cng1 »

It does make access to the engine bay rather easier :) In case anyone wonders the gas ram/hinge units are from an Audi 80 boot lid.
Official Megajolt distributor for UK and Europe.
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com

NITROPIXIE
Posts: 704
Joined: Sun Sep 07, 2008 1:54 pm
Location: Fareham, GB

Post by NITROPIXIE »

is that not an injection mini with an air filter like that???
1310 A-series Mini, lightened and built myself. V4 board and loving it

Rasputin22 - The Mini Forum
Rasputin22 - MK1 Golf Forum

Megajolt repair for the UK available

cng1
Posts: 282
Joined: Mon Dec 06, 2004 7:56 pm
Contact:

Post by cng1 »

It's a 92 SPI injection cooper. When we bought it [mumble] years ago it was part way through a carb conversion and was supposedly 99% finished. In reality it was missing carb, ignition system, manifolds, fuel pump, tank... oh and worse than that all the panels forward of the bulkhead were rotten through and all the panels below ankle-high were also rotten through. Cue a major resto project, a megajolt install and the development of the A-series map from which many of the ones you see floating around now are derived.

More recently though the car has been used as an injection testbed - there was too much FUD floating around about how it was impossible to inject a siamese ported engine so liking to take on an "impossible" challenge we set out to prove things once and for all. We've had all the combinations of single-point and multi-point port injection on there and proven that within limits injection is very possible.
Official Megajolt distributor for UK and Europe.
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com

britlude
Posts: 64
Joined: Thu Nov 29, 2007 6:25 pm
Location: garden of England

Post by britlude »

I suppose i better add a pic......
Attachments
Image1064 [640x480].jpg
Image1064 [640x480].jpg (115.57 KiB) Viewed 7868 times

NITROPIXIE
Posts: 704
Joined: Sun Sep 07, 2008 1:54 pm
Location: Fareham, GB

Post by NITROPIXIE »

Here is another for the site banner. Its the best pic i have at the moment.

Interesting car cng1, what ecu did you use for the siamese injecting. I was looking at injecting my current project and have fitted a return line and tapped the tank but that is kind of on hold at the moment.
Attachments
Mini autosportlabs.jpg
Mini autosportlabs.jpg (32.25 KiB) Viewed 7856 times
1310 A-series Mini, lightened and built myself. V4 board and loving it

Rasputin22 - The Mini Forum
Rasputin22 - MK1 Golf Forum

Megajolt repair for the UK available

cng1
Posts: 282
Joined: Mon Dec 06, 2004 7:56 pm
Contact:

Post by cng1 »

Bog standard Megasquirt running the extra code is all you need to inject an a-series. Avoid the port injected twin-point setup, the single-point SPI setup is a much better starting point. You can run some semi-sequential code that attempts to minimise the charge robbing but I didn't bother.
Official Megajolt distributor for UK and Europe.
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com

Post Reply