Hard rev limiter production update

Discussion on the Hard Rev Limiter module, currently under beta testing. <a href="http://www.autosportlabs.net/Hard_rev_limiter_1.1.0">Project Information</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
brentp
Site Admin
Posts: 6160
Joined: Wed Jan 24, 2007 6:36 am

Hard rev limiter production update

Post by brentp »

A quick update on the hard rev limiter.

We have two more beta testers scheduled to test the hard rev limiter. Based on the previous testing I do not anticipate any problems- but they are out there for a final 'sanity check'.

For production, the following minor changes will be made:

* Board size increased slightly. However, it will still fit inside the MJLJ case for those that want an integrated installation.
* Mounting holes added to board to facilitate other installation options.
* Screw terminal posts will be eliminated. Connection to the board will be made using wire soldered with large solder pads, and the user can determine the secondary connectors
* The surface mount SOT-23 PNP transistor in the circuit may be too small for the average user to solder. Pads will be added so a common PNP through hole transistor can be used in it's place.

Production availability is about 2 weeks from now.

Thanks for your patience!
Last edited by brentp on Wed Mar 05, 2008 7:56 pm, edited 1 time in total.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Salamander
Posts: 89
Joined: Mon Nov 13, 2006 9:46 pm

Post by Salamander »

I want one 8)

The other has not reached me yet :cry:
dammit :evil:

brentp
Site Admin
Posts: 6160
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Don't worry! your beta test unit should arrive soon! :)

frans
Posts: 2
Joined: Sun Dec 23, 2007 8:33 pm

Post by frans »

Sorry to be a pain but how about an update on the final production date?
Regards
Frans

brentp
Site Admin
Posts: 6160
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hello All,

Firm is they will be available for purchase on April 10. I will follow up with pricing soon.

Thanks,
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

brentp
Site Admin
Posts: 6160
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Update!

Boards and parts are now in.

Image

Primary changes: The board size was made larger to accommodate V3 and V4 cases, and pads for a through hole transistor were added to ease kit building.

I should have these in the store by the end of the weekend.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply