Have I got a component missing?

Discussion on the Hard Rev Limiter module, currently under beta testing. <a href="http://www.autosportlabs.net/Hard_rev_limiter_1.1.0">Project Information</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
shiner
Posts: 2
Joined: Wed Feb 03, 2010 9:03 pm
Location: Portsmouth

Have I got a component missing?

Post by shiner »

I have received my hard rev limiter board today and seem to have all components except a transistor but there is no number printed on the board so I cannot tell you the component number, but by the looks of it there is only one transistor.

Does anyone know what transistor it is so I can go and source one?

If it helps its directly above the TRIG pin.

Many thanks,

Martin

cng1
Posts: 282
Joined: Mon Dec 06, 2004 7:56 pm
Contact:

Post by cng1 »

Don't worry about the missing component. The board is set up to use two different types of transistor, one easy for DIY soldering, one for easy automated machine production. If you bought your board ready made then it will have the Q1 location populated and the other location (the one with C B and E labels) empty which is just fine.
Official Megajolt distributor for UK and Europe.
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com

shiner
Posts: 2
Joined: Wed Feb 03, 2010 9:03 pm
Location: Portsmouth

Post by shiner »

Many thanks for your help, i will leave it be.

Post Reply